DataSheet.jp

SAFFB1G96FN0F0A の電気的特性と機能

SAFFB1G96FN0F0AのメーカーはmuRataです、この部品の機能は「SAW FILTER」です。


製品の詳細 ( Datasheet PDF )

部品番号 SAFFB1G96FN0F0A
部品説明 SAW FILTER
メーカ muRata
ロゴ muRata ロゴ 




このページの下部にプレビューとSAFFB1G96FN0F0Aダウンロード(pdfファイル)リンクがあります。

Total 7 pages

No Preview Available !

SAFFB1G96FN0F0A Datasheet, SAFFB1G96FN0F0A PDF,ピン配置, 機能
SAW FILTER FOR UMTS Band2 Rx
Murata part number : SAFFB1G96FN0F0A
Package Dimensions
Top View
1.10±0.05
(5) (4)
(1)
Dot Marking(0.2)
HX
$
(2) (3)
(0.15)
Bottom View
(2) (3)
(1)
(0.05)
2-0.20±0.03
(5) (4)
5-0.20±0.03
2-0.20±0.03
Marking: Laser Printing
* : EIAJ Code
(Refer to the table 1)
$ : Date Code
(Refer to the table 2)
(1) : Unbalance port
(3) (4) : Balance port
Others : Ground
Unit : mm
Specification
Item
Nominal Center Frequency(fc)
-30 to 85°C
Spec if ic ation
25±2°C
1960 MHz
typ.
Insertion Loss
(1930.48 to 1989.52 MHz)
(1932.4 to 1987.6 MHz)*
4.0 dB max. 3.5 dB max.
4.0 dBINT max. 3.5 dBINT max.
3.1 dB
3.0 dBINT
Absolute Attenuation
1) 0.1 to 824 MHz
2) 824 to 849 MHz
3) 849 to 1850 MHz
4) 1850 to 1910 MHz
5) 1850.48 to 1909.52 MHz
6) 1852.4 to 1907.6 MHz*
7) 2400 to 2484 MHz
8) 3860 to 3980 MHz
9) 3980 to 6000 MHz
Ripple Deviation
(1930.48 to 1989.52 MHz)
50 dB min.
50 dB min.
45 dB min.
46 dB min.
46 dB min.
46 dBINT min.
40 dB min.
40 dB min.
40 dB min.
50 dB min.
50 dB min.
45 dB min.
46 dB min.
46 dB min.
46 dBINT min.
40 dB min.
40 dB min.
40 dB min.
2.5 dB max. 1.8 dB max.
63 dB
63 dB
56 dB
50 dB
50 dB
53 dBINT
54 dB
53 dB
51 dB
1.2 dB
VSWR
(1930.48 to 1989.52 MHz)
2.0 max.
1.9 max.
1.6
Amplitude Balance
(1930.48 to 1989.52 MHz)
±1.0 dB max. ±1.0 dB max.
+0.5 dB
Phase Balance
(1930.48 to 1989.52 MHz)
180±7 deg.max. 180±7 deg. 180.0+4.7 deg.
max.
Unbalance Port Matching Impedance
(nominal)
Balance Port Matching Impedance
(nominal)
Input Signal Level
50Ω
100Ω // 22nH
31.6mW (+15dBm), 2000 hours
(1850-1910MHz, at 50)
20mW (+13dBm), 2000 hours
(elsew here)
* Integration calculation (dBINT):
   dBINT
10 10N
( Loss( fn1 ) /10)
( Loss( fn ) /10)

10
log
n
2
2
FN F1

Fn Fn1  

 
Mar. 16, 2011
1/5

1 Page





SAFFB1G96FN0F0A pdf, ピン配列
SAW FILTER FOR UMTS Band2 Rx
Murata part number : SAFFB1G96FN0F0A
Dimensions of
Carrier Tape
4.00±0.05
+0.1
2.00±0.05 φ1.5-0.0
Dimensions
of Tape
Dimensions of Reel
Mar. 16, 2011
3°max.
Direction of Feed
Cover Tape
1.05±0.05
0.20±0.05
0.55±0.05
Unit: mm
Trailer tape
160...190
Components
80...120
Leader Cavity
400...560
Unit: mm
2.0±0.5
9.0±0.5
13.5max.
13.0±0.5
Unit: mm
SAFFB1G96FN0F0AR1X … 10000pcs/reel
SAFFB1G96FN0F0AR15 … 5000pcs/reel
3/5


3Pages


SAFFB1G96FN0F0A 電子部品, 半導体
SAW FILTER FOR UMTS Band2 Rx
Murata part number : SAFFB1G96FN0F0A
Important notice
PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS.
Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the
specifications of our product when our product is mounted to your product.
All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that
our product is used for the purpose, under the condition and in the environment specified in this specification. You are
requested not to use our product deviating from the condition and the environment specified in this specification.
Please note that the only warranty that we provide regarding the products is its conformance to the specifications
provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such
products, which are caused under the conditions other than those specified in this specification.
WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY
ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS.
The product shall not be used in any application listed below which requires especially high reliability for the prevention
of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree
that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements.
Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS,
DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION,
ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment - Medical equipment.
- Transportation equipment (vehicles, trains, ships, elevator, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Burning / explosion control equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our
product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by
the regulations and laws in the world.
We do not warrant or represent that any license, either express or implied, is granted under any our patent right,
copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in
which our products or services are used. Information provided by us regarding third-party products or services does
not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such
information may require a license from a third party under the patents or other intellectual property of the third party, or
a license from us under our patents or other intellectual property.
Please do not use our products, our technical information and other data provided by us for the purpose of developing
of mass-destruction weapons and the purpose of military use.
Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations",
etc.
Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of
materials and/or components from our suppliers.
Mar. 16, 2011

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ SAFFB1G96FN0F0A データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
SAFFB1G96FN0F0A

SAW FILTER

muRata
muRata


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap