|
|
PDF AMEL10-AZ Data sheet ( Hoja de datos )
| Número de pieza | AMEL10-AZ | |
| Descripción | AC-DC / DC-DC Converter | |
| Fabricantes | AIMTEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AMEL10-AZ (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Click on Series name for product info on aimtec.com
Series AMEL10-AZ
10 Watt | AC-DC / DC-DC Converter
FEATURES:
I/O Isolation 3000VAC
RoHS Compliant
Operating Temp: -40 oC to +80 oC
Energy Star Compliant
Input: 90-305VAC, 47-440Hz, or 130-430VDC Efficiency up to 83%
Over Load, Over Voltage, Short Circuit Protection Soft Start
Models
Single output
CB
Model
AMEL10-3.3SAZ
AMEL10-5SAZ
AMEL10-12SAZ
AMEL10-15SAZ
AMEL10-24SAZ
Input
Voltage
(VAC/Hz)
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
Input
Voltage
(VDC)
130-430
130-430
130-430
130-430
130-430
Temperature
range
(ºC)
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
Output
Voltage
(V)
3.3
5
12
15
24
Output
Current
max (A)
3.00
2.00
0.84
0.67
0.42
Maximum
capacitive
Load
(µF)
2200
1000
680
470
470
Efficiency
(%)
115 230 277
VAC VAC VAC
75 74 73
77 75 74
83 82 81
83 81 80
82 81 79
Note: Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL10-5SAZ-ST)
Input Specifications
Parameters
Current (full load)
Inrush current <2ms (cold start)
Leakage current
External fuse
Input dissipation
Start-up time
Conditions
115 VAC
230 VAC
277 VAC
115 VAC
230 VAC
277 VAC
Recommended slow blow type
(110/230/277 VAC)
Typical
1
≦0.2
50
Maximum
230
150
140
20
35
50
0.25
Units
mA
mA
mA
A
A
A
mA
A
W
ms
Output Specifications
Parameters
Conditions
Typical
Voltage accuracy
±2
Line regulation
±1
Load regulation
0-100% load
±2
Transient recovery time
500
Transient response deviation
25% load step
±2
3.3/5V models
75
Ripple & Noise*
12/15V models
100
24V models
150
Hold-up time
15
* Ripple and Noise are measured at 20MHz bandwidth by using a 0.1µF (M/C) and 47µF (E/C) parallel capacitor.
Isolation Specifications
Parameters
Tested I/O voltage
Isolation Resistance
Conditions
60 sec
Typical
>1000
Maximum
Units
%
%
%
µs
% of Vout
mV p-p
mV p-p
mV p-p
ms
Rated
3000
Units
VAC
MΩ
General Specifications
Parameters
Switching frequency
Over load protection
Over voltage protection
www.aimtec.com
F 052e R8.K
Conditions
Foldback
Typical
66
130
Zener Diode Clamp
Tel: +1 514 620 2722
1 of 5
Maximum
Units
KHz
%
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
1 page  
Dimensions of Optional ST Mounting Plate Version
Series AMEL10-AZ
10 Watt | AC-DC / DC-DC Converter
Pin Out Specification ST Version
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8.K
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AMEL10-AZ.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AMEL10-AZ | AC-DC / DC-DC Converter | AIMTEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |