|
|
Número de pieza | HI-8588-10 | |
Descripción | ARINC 429 Line Receiver | |
Fabricantes | HOLTIC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HI-8588-10 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! August 2014
DESCRIPTION
The HI-8588-10 ARINC 429 bus interface receiver is simi-
lar to the HI-8588 with the exception that it allows an exter-
nal 10 Kohm resistor in series with each ARINC input with-
out affecting the ARINC input thresholds. The product is
especially useful in applications where lightning protection
circuitry is also required. In addition, the test inputs force
both of the outputs to zero instead of open circuit. The ana-
log/digital CMOS product requires only a 5 volt supply and
is available in a 8-pin SOIC package.
Each side of the ARINC bus must be connected through a
10 Kohm series resistor in order for the chip to detect the
correct ARINC levels. The typical 10 volt differential signal
is translated and input to a window comparator and latch.
The comparator levels are set so that with the external
10 Kohm resistors they are just below the standard 6.5 volt
minimum ARINC data threshold and just above the stan-
dard 2.5 volt maximum ARINC null threshold.
The TESTA and TESTB inputs bypass the analog inputs for
testing purposes. Also if TESTA and TESTB are both taken
high, the digital outputs are forced to zero.
See Holt Application Note AN-300 for more information on
lightning protection.
FEATURES
! ARINC 429 line receiver interface in a
small outline package
! Lightning protection simplified with the
ability to add 10 Kohm external series
resistors
! Receiver input hystersis at least 2 volts
! Test inputs bypass analog inputs and
force digital outputs to an one, zero or
null state
! Plastic and ceramic package options -
surface mount and DIP
HI-8588-10
ARINC 429
Line Receiver
PIN CONFIGURATION
VCC - 1
TESTA - 2
RINB - 3
RINA - 4
8 - TESTB
7 - ROUTB
6 - ROUTA
5 - GND
HI-8588PSI-10, HI-8588PST-10 & HI-8588PSM-10
8 - PIN PLASTIC NARROW BODY SOIC
SUPPLY VOLTAGES
vcc = 5.0V ± 5%
FUNCTION TABLE
RECEIVER
RINA
-1.25V to 1.25V
-3.25V to -6.5V
3.25V to 6.5V
X
X
X
RINB
-1.25V to 1.25V
3.25V to 6.5V
-3.25V to -6.5V
X
X
X
TESTA TESTB ROUTA ROUTB
0 0 00
0 0 01
0 0 10
0 1 01
1 0 10
1 1 00
PIN DESCRIPTION TABLE
PIN SYMBOL
1 VCC
2 TESTA
3 RINB
4 RINA
5 GND
6 ROUTA
7 ROUTB
8 TESTB
FUNCTION
SUPPLY
LOGIC INPUT
ARINC INPUT
ARINC INPUT
POWER
LOGIC OUTPUT
LOGIC OUTPUT
LOGIC INPUT
DESCRIPTION
5 VOLT SUPPLY
CMOS
RECEIVER B INPUT
RECEIVER A INPUT
GROUND
RECEIVER CMOS OUTPUT A
RECEIVER CMOS OUTPUT B
CMOS
(DS8588-10, Rev. E)
HOLT INTEGRATED CIRCUITS
www.holtic.com
08/14
1 page REVISION HISTORY
P/N
DS8488-10
Rev Date
E 08/05/14
HI-8588-10
Description of Change
Update ARINC input pins 3 & 4 Absolute Maximum Rating to +/-120V.
Update solder reflow temperature. Remove Mil. temperature rating. Update
SOIC-8 (8HN) package drawing.
HOLT INTEGRATED CIRCUITS
5
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet HI-8588-10.PDF ] |
Número de pieza | Descripción | Fabricantes |
HI-8588-10 | ARINC 429 Line Receiver | HOLTIC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |