DataSheet.es    


PDF USB2502 Data sheet ( Hoja de datos )

Número de pieza USB2502
Descripción 2-Port USB 2.0 Hub Controller
Fabricantes Microchip 
Logotipo Microchip Logotipo



Hay una vista previa y un enlace de descarga de USB2502 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! USB2502 Hoja de datos, Descripción, Manual

USB2502
2-Port USB 2.0 Hub Controller
Highlights
• Integrated USB 2.0 Compatible 2-Port Hub
- High-Speed (480Mbits/s), Full-Speed
(12Mbits/s) and Low-Speed (1.5Mbits/s)
compatible
- Full power management with ganged power
control
- Detects Bus-Power/Self-Power source and
changes mode automatically
• Complete USB Specification 2.0 Compatibility
- Includes USB 2.0 Transceivers
• VID/PID/DID, and Port Configuration for Hub via:
- Single Serial I2C EEPROM
- SMBus Slave Port
• Default VID/PID/DID, allows functionality when
configuration EEPROM is absent
• Hardware Strapping options allow for configura-
tion without an external EEPROM or SMBus Host
• On-Board 24MHz Crystal Driver Circuit or 24 MHz
external clock driver
• Internal PLL for 480MHz USB 2.0 Sampling
• Internal 1.8V Linear Voltage Regulator
• Integrated USB termination and Pull-up/Pull-down
resistors
• Internal Short Circuit protection of USB differential
signal pins
• Basic single-color LED support
• 1.8 Volt Low Power Core Operation
• 3.3 Volt I/O with 5V Input Tolerance
• 36-Pin QFN or 48-Pin TQFP RoHS compliant
package
2007 - 2016 Microchip Technology Inc.
DS000002248A-page 1

1 page




USB2502 pdf
2.0 PIN TABLE 2-PORT
TABLE 2-1: 2-PORT PIN TABLE FOR 36-QFN
UPSTREAM USB 2.0 INTERFACE (3 PINS)
USBDP0
USBDN0
VBUS_DET
2-PORT USB 2.0 INTERFACE (10 PINS)
USBDP1
GR1/
NON_REM0
PRTPWR
USBDN1
GR2/
NON_REM1
OCS_N
USBDP2
PRTPWR_POL
SERIAL PORT INTERFACE (3 PINS)
SDA/SMBDATA
SCL/SMBCLK/
CFG_SEL0
CFG_SEL1
MISC (7 PINS)
XTAL1/CLKIN
ATEST/
REG_EN
XTAL2
CLKIN_EN
RESET_N
TEST
POWER, GROUND (13 PINS)
TABLE 2-2: 2-PORT PIN TABLE FOR 48-TQFP
UPSTREAM USB 2.0 INTERFACE (3 PINS)
USBDP0
USBDN0
VBUS_DET
2-PORT USB 2.0 INTERFACE (10 PINS)
USBDP1
GR1/
NON_REM0
PRTPWR
USBDN1
GR2/
NON_REM1
OCS_N
USBDP2
PRTPWR_POL
SERIAL PORT INTERFACE (3 PINS)
SDA/SMBDATA
SCL/SMBCLK
CFG_SEL0
CFG_SEL1
MISC (7 PINS)
XTAL1/CLKIN
ATEST/
REG_EN
XTAL2
CLKIN_EN
RESET_N
TEST
POWER, GROUND AND NO CONNECT (25 PINS)
USB2502
USBDN2
RBIAS
SELF_PWR
USBDN2
RBIAS
SELF_PWR
2007 - 2016 Microchip Technology Inc.
DS000002248A-page 5

5 Page





USB2502 arduino
USB2502
TABLE 4-4: POWER, GROUND, AND NO CONNECT
Name
VDDCORE3P3
Symbol
VDD33CR
Type
+3.3V I/O Power.
Function
VDD1P8
VDD18
If the internal core 1.8V regulator is enabled, then this pin
acts as the regulator input
+1.8V core power.
VDDAPLL3P3 VDDA33PLL
If the internal regulator is enabled, then VDD18 pin 27
must have a 4.7F (or greater) ±20% (ESR <0.1
capacitor to VSS
+3.3V Filtered analog power for the internal PLL
VDDAPLL1P8 VDDA18PLL
If the internal PLL 1.8V regulator is enabled, then this pin
acts as the regulator input
+1.8V Filtered analog power for internal PLL.
VDDA3P3
VSS
VDDA33
VSS
If the internal regulator is enabled, then this pin must have
a 4.7F (or greater) ±20% (ESR <0.1capacitor to VSS
+3.3V Filtered analog power.
Ground.
TABLE 4-5:
Buffer
I
IPD
IPU
IS
I/O8
O8
IOSD12
ICLKx
OCLKx
I-R
IO-U
AIO
BUFFER TYPE DESCRIPTIONS
Description
Input.
Input, with a weak Internal pull-down.
Input, with a weak Internal pull-up.
Input with Schmitt trigger.
Input/Output 8mA
Output 8mA
Open drain….12mA sink with Schmitt trigger, and must meet I2C-Bus
Specification Version 2.1 requirements.
XTAL Clock Input
XTAL Clock Output
RBIAS
Defined in USB Specification.
Note: Meets USB 1.1 requirements when operating as a 1.1-compliant
device and meets USB 2.0 requirements when operating as a 2.0-
compliant device.
Analog Input/output. Per PHY test requirements.
2007 - 2016 Microchip Technology Inc.
DS000002248A-page 11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet USB2502.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
USB25022-Port USB 2.0 Hub ControllerMicrochip
Microchip
USB25022-Port USB 2.0 Hub ControllerSMSC Corporation
SMSC Corporation
USB2503Integrated USB 2.0 Compatible 3-Port HubMicrochip
Microchip
USB2503Integrated USB2.0 Compatible 3-Port HubSMSC Corporation
SMSC Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar