STP11N60DM2 Datasheet PDF - STMicroelectronics
| Part Number | STP11N60DM2 | |
| Description | N-CHANNEL POWER MOSFET | |
| Manufacturers | STMicroelectronics | |
| Logo |  |
|
|
There is a preview and STP11N60DM2 download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
STP11N60DM2
N-channel 600 V, 0.370 Ω typ., 10 A MDmesh™ DM2
Power MOSFET in a TO-220 package
Datasheet - production data
Figure 1: Internal schematic diagram
Features
Order code
STP11N60DM2
VDS @
TJmax.
650 V
RDS(on)
max.
0.420 Ω
ID
10 A
PTOT
110 W
Fast-recovery body diode
Extremely low gate charge and input
capacitance
Low on-resistance
100% avalanche tested
Extremely high dv/dt ruggedness
Zener-protected
Applications
Switching applications
Description
This high voltage N-channel Power MOSFET is
part of the MDmesh™ DM2 fast recovery diode
series. It offers very low recovery charge (Qrr)
and time (trr) combined with low RDS(on), rendering
it suitable for the most demanding high efficiency
converters and ideal for bridge topologies and
ZVS phase-shift converters.
Order code
STP11N60DM2
Table 1: Device summary
Marking
11N60DM2
Package
TO-220
Packing
Tube
June 2016
DocID029388 Rev 1
This is information on a product in full production.
1/12
www.st.com
|
| |
 
STP11N60DM2
Symbol
ISD(1)
ISDM(2)
VSD(3)
trr
Qrr
IRRM
trr
Qrr
IRRM
Parameter
Table 8: Source-drain diode
Test conditions
Electrical characteristics
Min. Typ. Max. Unit
Source-drain
current
- 10 A
Source-drain
current (pulsed)
- 40 A
Forward on voltage
Reverse recovery
time
Reverse recovery
charge
Reverse recovery
current
VGS = 0 V, ISD = 10 A
ISD = 10 A, di/dt = 100 A/µs,
VDD = 60 V (see Figure 16: "Test
circuit for inductive load switching
and diode recovery times")
- 1.6 V
- 90
ns
- 248
µC
- 5.5
A
Reverse recovery
time
ISD = 10 A, di/dt = 100 A/µs,
- 160
Reverse recovery
charge
VDD = 60 V, Tj = 150 °C (see
Figure 16: "Test circuit for
inductive load switching and diode
-
664
Reverse recovery
current
recovery times")
- 8.3
ns
nC
A
Notes:
(1) Limited by maximum junction temperature.
(2) Pulse width is limited by safe operating area.
(3) Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
Symbol
V(BR)GSO
Table 9: Gate-source Zener diode
Parameter
Test conditions
Gate-source breakdown voltage IGS = ±250 µA, ID = 0 A
Min. Typ. Max. Unit
±30 -
-V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD
performance of the device. The Zener voltage facilitates efficient and cost-effective device
integrity protection, thus eliminating the need for additional external componentry.
DocID029388 Rev 1
5/12
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for STP11N60DM2 electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ STP11N60DM2.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| STP11N60DM2 | The function is N-CHANNEL POWER MOSFET. STMicroelectronics | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
STP1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||