DataSheet.jp

83056 の電気的特性と機能

83056のメーカーはIDTです、この部品の機能は「Single-Ended Multiplexer」です。


製品の詳細 ( Datasheet PDF )

部品番号 83056
部品説明 Single-Ended Multiplexer
メーカ IDT
ロゴ IDT ロゴ 




このページの下部にプレビューと83056ダウンロード(pdfファイル)リンクがあります。

Total 15 pages

No Preview Available !

83056 Datasheet, 83056 PDF,ピン配置, 機能
6:1, Single-Ended Multiplexer
83056
Data Sheet
GENERAL DESCRIPTION
The 83056 is a low skew, 6:1, Single-ended Multi-
plexer from IDT. The 83056 has six selectable single-
ended clock inputs and one single-ended clock output. The
output has a V pin which may be set at 3.3V, 2.5V, or
DDO
1.8V, making the device ideal for use in voltage transla-
tion applications. An output enable pin places the output in
a high impedance state which may be useful for testing or
debug purposes. The device operates up to 250MHz and is pack-
aged in a 16 TSSOP package.
FEATURES
• 6:1 single-ended multiplexer
• Q nominal output impedance: 7Ω (V = 3.3V)
DDO
• Maximum output frequency: 250MHz
• Propagation delay: 3ns (maximum), V = V = 3.3V
DD DDO
• Input skew: 225ps (maximum), V = V = 3.3V
DD DDO
• Part-to-part skew: 475ps (maximum), V = V = 3.3V
DD DDO
• Additive phase jitter, RMS: 0.19ps (typical), 3.3V/3.3V
• Operating supply modes:
V /V
DD DDO
3.3V/3.3V
3.3V/2.5V
3.3V/1.8V
2.5V/2.5V
2.5V/1.8V
• -40°C to 85°C ambient operating temperature
• Available in lead-free (RoHS 6) package
BLOCK DIAGRAM
CLK0
CLK1
CLK2
CLK3
CLK4
CLK5
SEL2
SEL1
SEL0
OE
PIN ASSIGNMENT
Q
83056
16-Lead TSSOP
4.4mm x 5.0mm x 0.92mm package body
G Package
Top View
©2016 Integrated Device Technology, Inc
1
Revision B March 10, 2016

1 Page





83056 pdf, ピン配列
83056 Data Sheet
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
DD
Inputs, V
I
Outputs, V
O
Package Thermal Impedance, θ
JA
Storage Temperature, T
STG
4.6V
-0.5V to V + 0.5 V
DD
-0.5V to V + 0.5V
DDO
89°C/W (0 lfpm)
-65°C to 150°C
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. These ratings are stress specifications only. Functional
operation of product at these conditions or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is
not implied. Exposure to absolute maximum rating conditions for
extended periods may affect product reliability.
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, V = V = 3.3V±5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum
V Power Supply Voltage
DD
V Output Supply Voltage
DDO
I Power Supply Current
DD
I Output Supply Current
DDO
3.135
3.135
Typical
3.3
3.3
Maximum
3.465
3.465
40
5
Units
V
V
mA
mA
TABLE 4B. POWER SUPPLY DC CHARACTERISTICS, V = 3.3V±5%, V = 2.5V±5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical
V Power Supply Voltage
DD
V Output Supply Voltage
DDO
I Power Supply Current
DD
I Output Supply Current
DDO
3.135
2.375
3.3
2.5
Maximum
3.465
2.625
40
5
Units
V
V
mA
mA
TABLE 4C. POWER SUPPLY DC CHARACTERISTICS, V = 3.3V±5%, V = 1.8V±0.2V, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical
V Power Supply Voltage
DD
V Output Supply Voltage
DDO
I Power Supply Current
DD
I Output Supply Current
DDO
3.135
1.71
3.3
1.8
Maximum
3.465
1.89
40
5
Units
V
V
mA
mA
TABLE 4D. POWER SUPPLY DC CHARACTERISTICS, V = V = 2.5V±5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum
V Power Supply Voltage
DD
V Output Supply Voltage
DDO
I Power Supply Current
DD
I Output Supply Current
DDO
2.375
2.375
Typical
2.5
2.5
Maximum
2.625
2.625
35
5
Units
V
V
mA
mA
TABLE 4E. POWER SUPPLY DC CHARACTERISTICS, V = 2.5V±5%, V = 1.8V±0.2V, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical
V Power Supply Voltage
DD
V Output Supply Voltage
DDO
I Power Supply Current
DD
I Output Supply Current
DDO
2.375
1.71
2.5
1.8
Maximum
2.625
1.89
35
5
Units
V
V
mA
mA
©2016 Integrated Device Technology, Inc
3
Revision B March 10, 2016


3Pages


83056 電子部品, 半導体
83056 Data Sheet
TABLE 5D. AC CHARACTERISTICS, V = V = 2.5V ± 5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f
MAX
tp
LH
tp
HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
2.5 3.0 3.5
2.5 2.9 3.4
60 175
Buffer Additive Phase Jitter, RMS;
tjit refer to Additive Phase Jitter Section;
NOTE 3
155.52MHz,
(12kHz to 20MHz)
0.21
tsk(pp) Part-to-Part Skew; NOTE 2, 4
300
t /t
RF
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
100
40
500
60
MUX MUX Isolation
ISOL
@ 100MHz
45
NOTE 1: Measured from V /2 of the input to V /2 of the output.
DD DDO
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V /2.
DDO
Units
MHz
ns
ns
ps
ps
ps
ps
%
dB
TABLE 5E. AC CHARACTERISTICS, V = 2.5V ± 5%, V = 1.8V ± -5%, TA = -40°C TO 85°C
DD DDO
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f
MAX
tp
LH
tp
HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
2.6 3.3 4.0
2.7 3.3 4.0
50 150
Buffer Additive Phase Jitter, RMS;
tjit refer to Additive Phase Jitter Section;
NOTE 3
155.52MHz,
(12kHz to 20MHz)
0.17
tsk(pp) Part-to-Part Skew; NOTE 2, 4
325
t /t
RF
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
100
40
700
60
MUX MUX Isolation
ISOL
@ 100MHz
45
NOTE 1: Measured from V /2 of the input to V /2 of the output.
DD DDO
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V /2.
DDO
Units
MHz
ns
ns
ps
ps
ps
ps
%
dB
©2016 Integrated Device Technology, Inc
6
Revision B March 10, 2016

6 Page



ページ 合計 : 15 ページ
 
PDF
ダウンロード
[ 83056 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
8305

Connector Modules with Intergrated LAN Magnetics

ETC
ETC
83054

Single-Ended Multiplexer

IDT
IDT
83056

Single-Ended Multiplexer

IDT
IDT
83058

Single-Ended Multiplexer

IDT
IDT


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap