DataSheet.jp

MC14007UB の電気的特性と機能

MC14007UBのメーカーはMotorola Semiconductorsです、この部品の機能は「Dual Complementary Pair Plus Inverter」です。


製品の詳細 ( Datasheet PDF )

部品番号 MC14007UB
部品説明 Dual Complementary Pair Plus Inverter
メーカ Motorola Semiconductors
ロゴ Motorola Semiconductors ロゴ 




このページの下部にプレビューとMC14007UBダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

MC14007UB Datasheet, MC14007UB PDF,ピン配置, 機能
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Dual Complementary Pair
Plus Inverter
The MC14007UB multi–purpose device consists of three N–channel and
three P–channel enhancement mode devices packaged to provide access to
each device. These versatile parts are useful in inverter circuits, pulse–
shapers, linear amplifiers, high input impedance amplifiers, threshold
detectors, transmission gating, and functional gating.
Diode Protection on All Inputs
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Capable of Driving Two Low–power TTL Loads or One Low–power
Schottky TTL Load Over the Rated Temperature Range
Pin–for–Pin Replacement for CD4007A or CD4007UB
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎThis device has 2 outputs without ESD Protection. Anti–static
precautions must be taken.
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMAXIMUM RATINGS* (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSymbol
Parameter
Value
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVDD DC Supply Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎVin, Vout Input or Output Voltage (DC or Transient)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎlin, lout Input or Output Current (DC or Transient),
per Pin
– 0.5 to + 18.0
– 0.5 to VDD + 0.5
± 10
V
V
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPD Power Dissipation, per Package†
500 mW
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTstg Storage Temperature
– 65 to + 150
_C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTL Lead Temperature (8–Second Soldering)
260 _C
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ*Maximum Ratings are those values beyond which damage to the device may occur.
†Temperature Derating:
Plastic “P and D/DW” Packages: – 7.0 mW/_C From 65_C To 125_C
Ceramic “L” Packages: – 12 mW/_C From 100_C To 125_C
INPUT
A
B 12
1
C3
VDD 5
14
INPUT OUTPUT CONDITION
1 A = C, B = OPEN
0 A = B, C = OPEN
INPUT
6
Substrates of P–channel devices internally
connected to VDD; substrates of N–channel
devices internally connected to VSS.
13
8
7 VSS
A
9
B
2
4
C
11
10
Figure 1. Typical Application: 2–Input Analog Multiplexer
MC14007UB
L SUFFIX
CERAMIC
CASE 632
P SUFFIX
PLASTIC
CASE 646
D SUFFIX
SOIC
CASE 751A
ORDERING INFORMATION
MC14XXXUBCP
MC14XXXUBCL
MC14XXXUBD
Plastic
Ceramic
SOIC
TA = – 55° to 125°C for all packages.
PIN ASSIGNMENT
D–PB
S–PB
GATEB
S–NB
D–NB
GATEA
VSS
1 14
2 13
3 12
4 11
5 10
69
78
D = DRAIN
S = SOURCE
VDD
D–PA
OUTC
S–PC
GATEC
S–NC
D–NA
SCHEMATIC
14 13
21
11
6 12
78 3
4 5 10
VDD = PIN 14
VSS = PIN 7
9
REV 3
1/94
©MMOotoTrOolaR, IOncL. A199C5MOS LOGIC DATA
MC14007UB
31

1 Page





MC14007UB pdf, ピン配列
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSWITCHING CHARACTERISTICS* (CL=50pF,TA=25_C)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Rise Time
tTLH = (1.2 ns/pF) CL + 30 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtTLH = (0.5 ns/pF) CL + 20 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtTLH = (0.4 ns/pF) CL + 15 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Fall Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtTHL = (1.2 ns/pF) CL + 15 ns
tTHL = (0.5 ns/pF) CL + 15 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtTHL = (0.4 ns/pF) CL + 10 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTurn–Off Delay Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH = (1.5 ns/pF) CL + 35 ns
tPLH = (0.2 ns/pF) CL + 20 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH = (0.15 ns/pF) CL + 17.5 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTurn–On Delay Time
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPHL = (1.0 ns/pF) CL + 10 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPHL = (0.3 ns/pF) CL + 15 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPHL = (0.2 ns/pF) CL + 15 ns
Symbol
tTLH
tTHL
tPLH
tPHL
VDD
Vdc
5.0
10
15
5.0
10
15
5.0
10
15
5.0
10
15
Min Typ # Max Unit
ns
90 180
— 45 90
35 70
ns
75 150
— 40 80
30 60
ns
60 125
30 75
25 55
ns
60 125
30 75
25 55
* The formulas given are for the typical characteristics only. Switching specifications are for device connected as an inverter.
#Data labelled “Typ” is not to be used for design purposes but is intended as an indication of the IC’s potential performance.
VDD = – VGS
14
7 VSS
IOH
VDS = VOH – VDD
VDD = VGS
14
IOL VDS = VOL
7 VSS
All unused inputs connected to ground.
All unused inputs connected to ground.
0
c
– 4.0
VGS = – 5.0 Vdc b
– 8.0 a TA = – 55°C
b TA = + 25°C
c TA = + 125°C
– 12
a
c
– 10 Vdc
– 16
b
c
b
a
a
– 15 Vdc
– 20
– 10
– 8.0 – 6.0 – 4.0 – 2.0
VDS, DRAIN VOLTAGE (Vdc)
–0
Figure 2. Typical Output Source Characteristics
20
a
b
VGS = 15 Vdc
16 c
a
10 Vdc
12
bc
a TA = – 55°C
8.0 b TA = + 25°C
c TA = + 125°C
4.0
a
b 5.0 Vdc
c
0
0 2.0 4.0 6.0 8.0 10
VDS, DRAIN VOLTAGE (Vdc)
Figure 3. Typical Output Sink Characteristics
These typical curves are not guarantees, but are design aids.
Caution: The maximum current rating is 10 mA per pin.
MOTOROLA CMOS LOGIC DATA
MC14007UB
33


3Pages


MC14007UB 電子部品, 半導体
–A–
14
1
G
OUTLINE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751A–03
ISSUE F
8
–B– P 7 PL
0.25 (0.010) M B M
7
C R X 45 _
F
–T–
SEATING
PLANE
D 14 PL
K
0.25 (0.010) M T B S A S
M
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
A 8.55 8.75 0.337 0.344
B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
D 0.35 0.49 0.014 0.019
F 0.40 1.25 0.016 0.049
G 1.27 BSC
0.050 BSC
J 0.19 0.25 0.008 0.009
K 0.10 0.25 0.004 0.009
M 0_ 7_ 0_ 7_
P 5.80 6.20 0.228 0.244
R 0.25 0.50 0.010 0.019
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided
in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters,
including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent
rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant
into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a
situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application,
Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered
trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
MFAX: [email protected] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MC14007UB
36
*MC14007UB/D*MOTOROLA CMOSMLCO14G0I0C7UDBA/DTA

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ MC14007UB データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MC14007UB

Dual Complementary Pair Plus Inverter

Motorola Semiconductors
Motorola Semiconductors
MC14007UB

Dual Complementary Pair Plus Inverter

ON Semiconductor
ON Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap