|
|
Datasheet SWPA3015S Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | SWPA3015S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability |  Sunlord | inductor |
SWP Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | SWP75N75 | N-channel Enhanced mode TO-220 MOSFET SW75N75
Features
High ruggedness Low RDS(ON) (Typ 6mΩ)@VGS=10V Low Gate Charge (Typ 126nC) Improved dv/dt Capability 100% Avalanche Tested ApplicationSynchronous Rectification,
Li Battery Protect Board, DC-DC
N-channel Enhanced mode TO-220 MOSFET
TO-220
12 3
1. Gate 2. D  Samwin mosfet | | |
| 2 | SWPA252010S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | | |
| 3 | SWPA252012S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | | |
| 4 | SWPA3010S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | | |
| 5 | SWPA3012S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | | |
| 6 | SWPA3015S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | | |
| 7 | SWPA4010S | Wire Wound SMD Power Inductors Wire Wound SMD Power Inductors – SWPA Series
Operating temperature range: -40℃~+125℃ (Including self-heating)
FEATURES
z Magnetic-resin shielded construction reduces buzz noise to ultra-low levels z Metallization on ferrite core results in excellent shock resistance and damage-free durability Sunlord inductor | |
| Esta página es del resultado de búsqueda del SWPA3015S. Si pulsa el resultado de búsqueda de SWPA3015S se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |