DataSheet.jp

A1162 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 A1162
部品説明 Programmable Precision Hall-Effect Switch
メーカ Allegro
ロゴ Allegro ロゴ 



Total 23 pages
		

No Preview Available !

A1162 Datasheet, A1162 PDF,ピン配置, 機能
A1162
Programmable Precision Hall-Effect
Switch with Advanced Diagnostics
FEATURES AND BENEFITS
• User-programmable unipolar switchpoints
• Integrated diagnostics for enhanced system safety and
reliability
□Enabled on demand
□Integrated electromagnetic coils test the entire sensor
signal path
□Designed for ISO 26262 / ASIL systems (QM)
• Chopper stabilized
□Resistant to physical stress
□Superior temperature stability
• Internal regulator for wide operating voltage range
□3.8 to 24 V
• Automotive-grade ruggedness
□Solid-state reliability
□Reverse-battery protection
□Output short-circuit protection
□AEC-Q100 qualified
2
-
• Small surface-mount package
PACKAGE:
8-Pin eTSSOP (Suffix LE)
Not to scale
DESCRIPTION
The A1162 is a unipolar Hall-effect switch with an externally
enabled diagnostic function and user-programmable
switchpoints. On-chip electromagnetic coils are used to
implement self-test of the sensor’s entire magnetic and electrical
signal chain. It is designed for systems where precise magnet
switchpoints and safety, reliability, or both, are critical, such
as those designed to meet the requirements of ISO 26262.
In normal operating mode, the A1162 functions as a standard
unipolar Hall-effect switch. The device output transistor turns
on (output signal switches low) in the presence of sufficient
magnetic field (>BOP max). The output transistor of the A1162
switches off (output signal switches high) when the magnetic
field is removed (<BRP min).
When the diagnostic feature is enabled, the output of theA1162
provides a square wave output which confirms the device
is properly sensing the internally generated magnetic field.
Therefore, use of the A1162 either eliminates the need for
redundant sensors in safety-critical applications or increases
robustness in safety-critical applications that might otherwise
require redundant sensors (drive-by-wire systems, etc.).
This monolithic IC integrates a voltage regulator, Hall voltage
generator, small-signal amplifier, chopper stabilization, Schmitt
trigger, and short-circuit-protected open-collector output able
to sink up to 25 mA. The on-board regulator permits operation
Continued on next page...
VCC
DIAG
A1162-DS
VREG
Regulator
To all subcircuits
AMP
Trim Control
Switchpoint
Programming
Signal
Recovery
Control
VREG
Threshold
NORM
DAIG
Current
Limit
System Diagnostics
VOUT
Functional Block Diagram
GND

1 Page





ページ 合計 : 23 ページ
PDF
ダウンロード
[ A1162.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
A1160

2SA1160

Toshiba Semiconductor
Toshiba Semiconductor
A1160

Chopper-Stabilized Precision Hall Effect Switch

Allegro
Allegro
A1162

Programmable Precision Hall-Effect Switch

Allegro
Allegro
A1162

2SA1162

Toshiba Semiconductor
Toshiba Semiconductor

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap