DataSheet.jp

ICE3B0365J-T の電気的特性と機能

ICE3B0365J-TのメーカーはInfineonです、この部品の機能は「Off-Line SMPS Current Mode Controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 ICE3B0365J-T
部品説明 Off-Line SMPS Current Mode Controller
メーカ Infineon
ロゴ Infineon ロゴ 




このページの下部にプレビューとICE3B0365J-Tダウンロード(pdfファイル)リンクがあります。

Total 25 pages

No Preview Available !

ICE3B0365J-T Datasheet, ICE3B0365J-T PDF,ピン配置, 機能
Datasheet, Version 2.0, 20 Mar 2013
CoolSET®-F3
(Jitter Version)
ICE3B0365J-T
Off-Line SMPS Current Mode
Controller with integrated 650V
CoolMOS® and Startup cell
(frequency jitter Mode) in DIP-8
Power Management & Supply
Never stop thinking.

1 Page





ICE3B0365J-T pdf, ピン配列
CoolSET®-F3
ICE3B0365J-T
Off-Line SMPS Current Mode Controller with
integrated 650V CoolMOS® and Startup cell
(frequency jitter Mode) in DIP-8
Product Highlights
• Active Burst Mode to reach the lowest Standby Power
Requirements < 100mW
• Adjustable Blanking Window for High Load Jumps to
PG-DIP-8
increase Reliability
• Frequency Jittering for Low EMI
• Low operating temperature down to -40°C
• Pb-free lead plating, RoHS compilant
Features
Description
• 650V Avalanche Rugged CoolMOS® with built in The CoolSET®-F3(Jitter version) meets the requirements
switchable Startup Cell
for Off-Line Battery Adapters and low cost SMPS for the
• Active Burst Mode for lowest Standby Power lower power range. By use of a BiCMOS technology a wide
@ light load controlled by Feedback Signal
VCC range up to 26V is provided. This covers the changes
• Fast Load Jump Response in Active Burst Mode in the auxiliary supply voltage if a CV/CC regulation is
• 67 kHz fixed Switching Frequency
implemented on the secondary side. Furthermore an Active
• Auto Restart Mode for Over temperature
Burst Mode is integrated to fullfill the lowest Standby Power
Detection
• Auto Restart Mode for Overvoltage Detection
Requirements <100mW at no load and Vin = 270VAC. As
during Active Burst Mode the controller is always active
• Auto Restart Mode for Overload and Open Loop there is an immediate response on load jumps possible
• Auto Restart Mode for VCC Undervoltage
without any black out in the SMPS. In Active Burst Mode
• User defined Soft Start
the ripple of the output voltage can be reduced <1%.
• Minimum of external Components required
Furthermore Auto Restart Mode is entered in case of
• Max Duty Cycle 75%
Overtemperature, VCC Overvoltage, Output Open loop or
• Overall Tolerance of Current Limiting < ±5%
Overload and VCC Undervoltage. By means of the internal
• Internal Leading Edge Blanking
precise peak current limitation, the dimension of the
• BiCMOS technology provides wide VCC Range transformer and the secondary diode can be lowered which
• Frequency Jittering for Low EMI
leads to more cost efficiency.
85 ... 270 VAC
GND
Typical Application
CBulk
Snubber
VCC
Power Management
CVCC
Drain
Startup Cell
PWM Controller
Current Mode
P recise Low Tolerance Peak
Current Limitation
C o n tro l
U n it
Active Burst Mode
Auto Restart Mode
CS
Depl. CoolMOS
FB
RSense
SoftS
C oolS E T-F3
(Jitter Version)
CSoftS
+
Converter
DC Output
-
Type
ICE3B0365J-T
Package
PG-DIP-8
Marking
3B0365J-T
VDS
650V
FOSC
67kHz
RDSon1)
6.45W
230VAC ±15%2)
22W
1) typ @ T=25°C
2) Calculated maximum input power rating at Ta=75°C, Tj=125°C and without copper area as heat sink
85-265 VAC2)
10W
Version 2.0
3 20 Mar 2013


3Pages


ICE3B0365J-T 電子部品, 半導体
2 Representative Blockdiagram
CoolSET®-F3
ICE3B0365J-T
Figure 2 Representative Blockdiagram
Version 2.0
6
20 Mar 2013

6 Page



ページ 合計 : 25 ページ
 
PDF
ダウンロード
[ ICE3B0365J-T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ICE3B0365J-T

Off-Line SMPS Current Mode Controller

Infineon
Infineon


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap