|
|
PDF SSMD60200PT Data sheet ( Hoja de datos )
| Número de pieza | SSMD60200PT | |
| Descripción | Schottky Barrier Rectifier ( Diode ) | |
| Fabricantes | Silikron Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SSMD60200PT (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
SSMD60200PT
Main Product Characteristics:
IF
VRRM
Tj(max)
Vf(max)
2×30A
200V
175℃
0.76V
Features and Benefits:
High Junction Temperature
High ESD Protection
High Forward & Reverse Surge capability
TO247
SSMD60200PT
Schematic Diagram
Description:
Schottky Barrier Rectifier designed for high frequency switch model power supplies such as adaptors and DC/DC
convertors; this product special design for high forward and reverse surge capability
Absolute Rating:
Symbol
Characterizes
Value
Unit
VRRM Peak Repetitive Reverse Voltage
200 V
VR(RMS) RMS Reverse Voltage
140 V
IF(AV) Average Forward Current
Per diode
Per device
30 A
60 A
IFSM Non Repetitive Surge Forward Current(tp=8.3ms sinusoidal)
300
A
IRRM Peak Repetitive Reverse Surge Current(Tp=2us)
TJ Maximum operation Junction Temperature Range
Tstg Storage Temperature Range
0.5
-55~175
-55~175
A
℃
℃
Thermal Resistance
Symbol
Characterizes
Value
Unit
RθJC Maximum Thermal Resistance Junction To Case (per leg)
Electrical Characterizes @TA=25℃ unless otherwise specified
Symbol
Characterizes
Min Typ Max Unit
1.2 ℃/W
Test Condition
Reverse Breakdown
VR Voltage
200
V IR=0.5mA
VF Forward Voltage Drop
IR Leakage Current
0.85
IF=15A, TJ=25℃
0.92 V IF=30A, TJ=25℃
0.76
IF=30A, TJ=125℃
0.1
5
mA
VR=200V, TJ=25℃
VR=200V, TJ=125℃
trr Reverse recovery time
Irrm Peak recovery current
28 35
1.2 2
ns
A IF=30A,di/dt=100A/us,VR=30V
©Silikron Semiconductor CO., LTD.
2011.5.26
www.silikron.com
Version: 1.0
page 1of5
1 page  
SSMD60200PT
ATTENTION:
■ Any and all Silikron products described or contained herein do not have specifications that can handle applications
that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other
applications whose failure can be reasonably expected to result in serious physical and/or material damage.
Consult with your Silikron representative nearest you before using any Silikron products described or contained
herein in such applications.
■ Silikron assumes no responsibility for equipment failures that result from using products at values that exceed,
even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed
in products specifications of any and all Silikron products described or contained herein.
■ Specifications of any and all Silikron products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees of the
performance, characteristics, and functions of the described products as mounted in the customer’s products or
equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer
should always evaluate and test devices mounted in the customer’s products or equipment.
■ Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to
accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause
damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for
safe design, redundant design, and structural design.
■ In the event that any or all Silikron products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported
without obtaining the export license from the authorities concerned in accordance with the above law.
■ No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior
written permission of Silikron Semiconductor CO.,LTD.
■ Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for
volume production. Silikron believes information herein is accurate and reliable, but no guarantees are made or
implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
■ Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
Silikron product that you intend to use.
■ This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change
without notice.
Customer Service
Worldwide Sales and Service:
Technical Support:
Suzhou Silikron Semiconductor Corp.
11A, 468 Xinglong Street, Suzhou Industrial Park, P.R.China
TEL: (86-512) 62560688
FAX: (86-512) 65160705
E-mail: [email protected]
©Silikron Semiconductor CO., LTD.
2011.5.26
www.silikron.com
Version: 1.0
page 5of5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet SSMD60200PT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SSMD60200PT | Schottky Barrier Rectifier ( Diode ) | Silikron Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |