|
|
Número de pieza | PI6C49X0204B | |
Descripción | 1-TO-4 LVCMOS/LVTTL Fanout Buffer | |
Fabricantes | Pericom Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PI6C49X0204B (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! PI6C49X0204B
Low Skew, 1-TO-4 LVCMOS/LVTTL
Fanout Buffer
Features
ÎÎFour LVCMOS / LVTTL outputs
ÎÎLVCMOS / LVTTL clock input
ÎÎCLK can accept the following input levels: LVCMOS, LVTTL
ÎÎMaximum output frequency: 250MHz
ÎÎAdditive phase jitter, RMS: 0.173ps (typical) @ 3.3V
ÎÎOutput skew: 45ps (maximum) @ 3.3V
ÎÎPart-to-part skew: 500ps (maximum)
ÎÎSmall 8 lead SOIC package saves board space
ÎÎFull 3.3V, 2.5V, 1.8V operation mode, or 3.3V/ 2.5V/ 1.8V
core with 2.5V, 1.8V, 1.5V supply modes
ÎÎ-40°C to 85°C ambient operating temperature
Description
The PI6C49X0204B is a low skew, 1-to-4 Fanout Buffer.
Guaranteed output and part-to-part skew characteristics make the
PI6C49X0204B ideal for those clock distribution applications
demanding well defined performance and repeatability.
Block Diagram
Pin Assignment
CLK Pulldown
Q0
VDDO
1
8 Q3
Q1
VDD 2
7 Q2
CLK 3
6 Q1
Q2
GND
4
5 Q0
Q3
15-0078
1 www.pericom.com PI6C49X0204B Rev A
07/20/15
1 page PI6C49X0204B
Low Skew, 1-TO-4 LVCMOS/LVTTL Fanout Buffer
AC CHARACTERISTICS, VDD = 3.3V ± 5%, TA = -45°C to 85°C
Symbol
Parameter
Conditions
Min. Typ. Max. Units
VDDO = 3.3V
250
fMAX
tpLH
tsk(o)
Output Frequency
Propagation Delay, Low-to-High;
NOTE 1
Output Skew; NOTE 2
VDDO = 2.5V
VDDO = 1.8V
VDDO = 1.5V
VDDO = 3.3V, IJ
250MHz
VDDO = 2.5V, IJ
250MHz
VDDO = 1.8V, IJ
250MHz
VDDO = 1.5V, IJ
250MHz
250 MHz
250
250
1.2 1.9
1.5 2.5
ns
1.8 3.1
1.9 3.8
25 100 ps
tsk(pp)
Part-to-Part Skew; NOTE 3
250 500
ps
VDDO = 3.3V
300
800
VDDO = 2.5V
300
1300
tR
Output Rise Time NOTE 4
VDDO = 1.8V
500
1300
ps
VDDO = 1.5V
800
1500
VDDO = 3.3V
300
800
VDDO = 2.5V
300
1300
tF
Output Fall Time NOTE 4
VDDO = 1.8V
500
1300
ps
VDDO = 1.5V
800
1500
odc Output Duty Cycle
IJ 133MHz
133MHz < IJ 200MHz
45
40
55 %
60 %
tjit Additive RMS Jitter
156.25MHz (@12kHz to
20MHz)
125MHz (@12kHz to
20MHz)
0.18
0.05
ps
ps
Parameters measured at f MAX unless otherwise noted.
NOTE 1: Measured from VDD /2 of the input to VDDO /2 of the output.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO /2.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load
conditions. Using the same type of inputs on each device, the outputs are measured at VDDO /2.
NOTE 4: Defined from 20% to 80%
15-0078
5 www.pericom.com PI6C49X0204B Rev A
07/20/15
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet PI6C49X0204B.PDF ] |
Número de pieza | Descripción | Fabricantes |
PI6C49X0204A | Low Skew 1 TO 4 Clock Buffer | Pericom Semiconductor |
PI6C49X0204B | 1-TO-4 LVCMOS/LVTTL Fanout Buffer | Pericom Semiconductor |
PI6C49X0204B-A | 1-TO-4 LVCMOS/LVTTL Fanout Buffer | Pericom Semiconductor |
PI6C49X0204C | Low Skew 1 TO 4 Clock Buffer | Pericom Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |