DataSheet.jp

DO1605T-682MLD の電気的特性と機能

DO1605T-682MLDのメーカーはCoilcraftです、この部品の機能は「SMT Power Inductors」です。


製品の詳細 ( Datasheet PDF )

部品番号 DO1605T-682MLD
部品説明 SMT Power Inductors
メーカ Coilcraft
ロゴ Coilcraft ロゴ 




このページの下部にプレビューとDO1605T-682MLDダウンロード(pdfファイル)リンクがあります。
Total 2 pages

No Preview Available !

DO1605T-682MLD Datasheet, DO1605T-682MLD PDF,ピン配置, 機能
Document 253-1
SMT Power Inductors – DO1605T
1Part number1
1L2 DCR  SRF3
±20% max ref Isat4 Irms5
(µH) (Ohms) (MHz) (A) (A)
DO1605T-102ML_
DO1605T-152ML_
DO1605T-222ML_
DO1605T-332ML_
DO1605T-472ML_
1.0 0.04 230 2.5 2.3
1.5 0.06 180 2.2 2.1
2.2 0.07 140 1.8 1.7
3.3 0.12 110 1.4 1.3
4.7 0.15 100 1.2 1.1
DO1605T-682ML_
DO1605T-822ML_
DO1605T-103ML_
DO1605T-153ML_
DO1605T-223ML_
6.8 0.20
8.2 0.23
10 0.27
15 0.35
22 0.54
80 1.1 1.0
70 1.0 0.95
60 1.0 0.90
45 0.8 0.70
35 0.6 0.50
DO1605T-333ML_ 33
DO1605T-473ML_ 47
DO1605T-683ML_ 68
DO1605T-104ML_ 100
DO1605T-154ML_ 150
0.74
1.1
1.6
2.3
3.5
30 0.5 0.45
22 0.45 0.40
20 0.35 0.35
15 0.30 0.30
10 0.25 0.25
DO1605T-224ML_ 220
DO1605T-334ML_ 330
DO1605T-474ML_ 470
DO1605T-684ML_ 680
DO1605T-105ML_ 1000
5.7
8.2
10.8
17.2
22.6
9 0.20 0.18
8 0.16 0.16
7 0.14 0.12
5 0.12 0.10
4 0.08 0.08
• Only 1.8 mm high
• Handles current up to 2.3 Amps rms
Designer’s Kit C353 contains 3 each of all values
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight  101 – 110 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7reel; 3500/13reel  Plastic tape:  12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. When ordering, please specify termination and packaging codes:
DO1605T-105MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape (3500 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. SRF >13 MHz measured using Agilent/HP 8753D network analyzer;
<13 MHz using Agilent/HP 4192A.
4. DC current at which the inductance drops 10% (typ) from its value
without current.
5. Current that causes a 40°C temperature rise from 25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 253-1  Revised 10/08/08
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ DO1605T-682MLD データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
DO1605T-682MLB

SMT Power Inductors

Coilcraft
Coilcraft
DO1605T-682MLC

SMT Power Inductors

Coilcraft
Coilcraft
DO1605T-682MLD

SMT Power Inductors

Coilcraft
Coilcraft


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap