DataSheet.jp

DO2010-224MLD の電気的特性と機能

DO2010-224MLDのメーカーはCoilcraftです、この部品の機能は「SMT Power Inductors」です。


製品の詳細 ( Datasheet PDF )

部品番号 DO2010-224MLD
部品説明 SMT Power Inductors
メーカ Coilcraft
ロゴ Coilcraft ロゴ 




このページの下部にプレビューとDO2010-224MLDダウンロード(pdfファイル)リンクがあります。
Total 2 pages

No Preview Available !

DO2010-224MLD Datasheet, DO2010-224MLD PDF,ピン配置, 機能
Document 413-1
SMT Power Inductors – DO2010
• Smallest power inductor, only 2 mm square and 1 mm high
• Can handle up to 0.51 A of saturating current
Designer’s Kit C399 contains 5 of each part
Core material Ferrite
Core and winding loss  See www.coilcraft.com/coreloss
Terminations  RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Weight  11 mg
Ambient temperature  –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature  Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat  Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)  1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging  1000/7reel; 3500/13reel  Plastic tape:  12 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth
PCB washing  Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Inductance DCR SRF
±20%2 max3 typ4 Isat5 Irms6
Part number1 (µH) (Ohms) (MHz) (A) (A)
DO2010-123ML_ 12
DO2010-153ML_ 15
DO2010-223ML_ 22
DO2010-333ML_ 33
DO2010-473ML_ 47
1.84 35 0.51 0.39
2.14 30 0.47 0.36
2.80 25 0.42 0.32
4.10 20 0.34 0.25
6.00 16 0.28 0.21
DO2010-683ML_ 68 8.80 13 0.23 0.16
DO2010-104ML_ 100 15.7 11 0.18 0.13
DO2010-224ML_ 220 38.0 8.0 0.10 0.08
1. When ordering, please specify termination and packaging codes:
DO2010-123MLC
Termination: L = RoHS compliant matte tin over nickel over silver-
platinum-glass frit
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3500 parts per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4191A or equivalent.
5. DC current at which the inductance drops 10% (typ) from its value with-
out current.
6. Current that causes a 40°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.079 ±0.008
2,0 ±0,2
0.079 ±0.008
2,0 ±0,2
0.039 ±0.004
1,0 ±0,1
0.026
0,65
Dimensions are in
inches
mm
Recommended
Land Pattern
0.035
0,89
0.087
2,20
0.063
1,60
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 413-1  Revised 12/27/10
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ DO2010-224MLD データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
DO2010-224MLB

SMT Power Inductors

Coilcraft
Coilcraft
DO2010-224MLC

SMT Power Inductors

Coilcraft
Coilcraft
DO2010-224MLD

SMT Power Inductors

Coilcraft
Coilcraft


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap