![]() |
|
Número de pieza | MSS5131-183MLB | |
Descripción | Shielded Power Inductors | |
Fabricantes | Coilcraft | |
Logotipo | ![]() |
|
Hay una vista previa y un enlace de descarga de MSS5131-183MLB (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available !
Document 642-1
Shielded Power Inductors – MSS5131
• 5.1 × 5.1 mm footprint; 3.1mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C362 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight 0.20 – 0.24 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 600/7″ reel, 2500/13″ reel; Plastic tape: 12 mm wide,
0.35 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR SRF Isat (A)4 Irms (A)5
Inductance2 max typ3 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
MSS5131-222ML_
MSS5131-332ML_
MSS5131-472ML_
MSS5131-562ML_
MSS5131-682ML_
2.2
3.3
4.7
5.6
6.8
0.020 65.0 1.76 2.08 2.30 2.00 3.30
0.028 60.0 1.33 1.58 1.73 1.60 2.90
0.038 48.0 1.08 1.32 1.42 1.40 2.50
0.042 44.0 1.00 1.20 1.30 1.30 2.30
0.050 42.0 0.98 1.14 1.24 1.20 2.16
MSS5131-822ML_
MSS5131-103ML_
MSS5131-123ML_
MSS5131-153ML_
MSS5131-183ML_
8.2
10
12
15
18
0.058 40.0 0.90 1.04 1.18 1.10 2.00
0.070 38.0 0.85 0.98 1.13 1.00 1.90
0.080 35.0 0.72 0.85 0.94 0.97 1.60
0.100 32.0 0.67 0.78 0.86 0.94 1.50
0.120 26.0 0.61 0.72 0.79 0.89 1.40
MSS5131-223ML_
MSS5131-273ML_
MSS5131-333ML_
MSS5131-393ML_
MSS5131-473ML_
22
27
33
39
47
0.145 22.0 0.54 0.64 0.70 0.87 1.30
0.161 19.0 0.48 0.56 0.62 0.85 1.20
0.200 18.0 0.44 0.52 0.58 0.80 1.10
0.215 17.0 0.42 0.50 0.55 0.74 1.00
0.270 16.0 0.38 0.46 0.51 0.71 0.95
MSS5131-563ML_ 56
MSS5131-683ML_ 68
MSS5131-823ML_ 82
MSS5131-104ML_ 100
MSS5131-124ML_ 120
0.280 15.0 0.34 0.42 0.47 0.70 0.90
0.368 12.5 0.31 0.38 0.42 0.66 0.85
0.420 12.0 0.27 0.32 0.35 0.62 0.80
0.580 11.5 0.26 0.30 0.33 0.55 0.69
0.610 11.0 0.23 0.27 0.30 0.51 0.62
MSS5131-154ML_ 150
MSS5131-184ML_ 180
MSS5131-224ML_ 220
MSS5131-274ML_ 270
MSS5131-334ML_ 330
0.820 10.0 0.21 0.26 0.28 0.47 0.58
1.00 9.0 0.19 0.23 0.25 0.43 0.54
1.10 8.0 0.18 0.21 0.23 0.39 0.50
1.43 7.5 0.15 0.18 0.20 0.35 0.45
1.58 6.8 0.13 0.17 0.19 0.32 0.42
MSS5131-394ML_ 390 1.80 5.4 0.12 0.15 0.16 0.30 0.38
1. Please specify termination and packaging codes:
MSS5131-394MLC
Termination: L = RoHS compliant matte tin over nickel
over phos bronze (current production)
or gold over nickel over phos bronze
(prior production).
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
over gold over nickel over phos bronze
or S = non-RoHS tin-lead (63/37) over
gold over nickel over phos bronze.
Packaging: C = 7″ machine-ready reel EIA-481 em-
bossed plastic tape (600 per full reel).
B = Less than full reel In tape, but not
machine-ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel EIA-481
embossed plastic tape. Factory order
only, not stocked (2500 per reel per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at 25°C that causes the specified induc-
tance drop from its value without current. Click for
temperature derating information.
5. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only
and does not represent absolute maximum ratings.
Click for temperature derating information.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
Document 642-1 Revised 09/02/15
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet MSS5131-183MLB.PDF ] |
Número de pieza | Descripción | Fabricantes |
MSS5131-183MLB | Shielded Power Inductors | ![]() Coilcraft |
MSS5131-183MLC | Shielded Power Inductors | ![]() Coilcraft |
MSS5131-183MLD | Shielded Power Inductors | ![]() Coilcraft |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
![]() Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
![]() Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |