DataSheet.jp

MJ-64J-RD315 の電気的特性と機能

MJ-64J-RD315のメーカーはJSTです、この部品の機能は「MJ CONNECTOR」です。


製品の詳細 ( Datasheet PDF )

部品番号 MJ-64J-RD315
部品説明 MJ CONNECTOR
メーカ JST
ロゴ JST ロゴ 




このページの下部にプレビューとMJ-64J-RD315ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

MJ-64J-RD315 Datasheet, MJ-64J-RD315 PDF,ピン配置, 機能
MJ CONNECTOR
Modular jack connectors
Upper contact point
Metal hook
Shielding effect
Grounding
Correspond to high-speed LAN transmission
(MJ-88U-SD315K-T)
Specifications –––––––––––––––––––
• Current rating: 1.3 A AC, DC
• Voltage rating: 250 V AC, DC
• Temperature range: -40˚C to +80˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 20 mmax.
After environmental tests/ 40 mmax.
• Insulation resistance: 1,000 Mmin.
• Withstanding voltage: 1,000 VAC/minute
• Applicable PC board thickness: 1.6 mm
2.4 mm (8 circuits straight type)
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
* Compliant with RoHS.
Standards ––––––––––––––––––––––
0 Recognized E174260
1Certified LR20812
Conforms to FCC Standards
(6 circuits and 8 circuits MJ connector)
Connector
Normal type
2/6 type
4/6 type
6/6 type
Note: 1. Tolerances are non-cumulative: ±0.05 mm for all centers.
2. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1

1 Page





MJ-64J-RD315 pdf, ピン配列
MJ CONNECTOR
Connector and PC board layout (viewed from component side)
Normal type (with shielding)
<8 circuits>
Normal type (with plastic hook)
<8 circuits>
Straight type (with shielding)
<8 circuits>
Circuit No.1
P.C.board edge
Connector edge
P.C.board edge
Connector edge
Type
Normal type (with shielding)
Normal type (with plastic hook)
Straight type (with shielding)
Circuits
8
8
8
Model No.
MJ-88H-RD315K
MJ-88R-RD315K
MJ-88U-SD315K-T
Material and Finish
Contact: Phosphor bronze, nickel-undercoated,
Mating part; gold-plated 1.27µm min.
Solder tail; tin-plated (reflow treatment)
Housing: Glass-filled PBT, UL94V-0(Normal type)
Glass-filled LCP, UL94V-0(Straight type)
Shield cover: Phosphor bronze, tin-plated (reflow treatment) [Normal type,Straight type]
Shield pin: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) [Straight type]
RoHS compliance This product displays (LF)(SN) on a label.
Note: 1. Tolerances are non-cumulative: ±0.05 mm for all centers.
2. Hole dimensions differ according to the type of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
3. Straight type product is designed for pressing the boss of housing into a PC board and mounting it on a PC board.
Cap for dust
<6 circuits>
Circuits
6
8
Model No.
MJ-JP56K
MJ-JP68K
Material
MJ-JP56K: PA 66, UL94V-0
MJ-JP68K: PBT, UL94V-0
RoHS compliance
Note: Not UL/CSA approved.
<8 circuits>
Q'ty / box
520
520
144
Q'ty / box
500
1,000
3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ MJ-64J-RD315 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MJ-64J-RD315

MJ CONNECTOR

JST
JST


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap