|
|
HCPL-0531のメーカーはHPです、この部品の機能は「High Speed Optocouplers」です。 |
部品番号 | HCPL-0531 |
| |
部品説明 | High Speed Optocouplers | ||
メーカ | HP | ||
ロゴ | |||
このページの下部にプレビューとHCPL-0531ダウンロード(pdfファイル)リンクがあります。 Total 12 pages
Dual Channel, High Speed
Optocouplers
Technical Data
HCPL-2530 HCPL-0530
HCPL-2531 HCPL-0531
HCPL-4534 HCPL-0534
Features
• 15 kV/µs Minimum Common
Mode Transient Immunity at
VCM = 1500 V
(HCPL-4534/0534)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8 Pin DIP, SO-8,
and 8 Pin DIP – Gull Wing
Surface Mount (Option 020)
Packages
• High Density Packaging
• 3 MHz Bandwidth
• Open Collector Outputs
• Guaranteed Performance
from 0°C to 70°C
• Safety Approval
UL Recognized – 2500 V rms
for 1 minute (5000 V rms for
1 minute for Option 020) per
UL1577
CSA Approved
• Single Channel Version
Available (4502/3, 0452/3)
• MIL-STD-1772 Version
Available (55XX/65XX/4N55)
Applications
• Line Receivers – High
Common Mode Transient
Immunity (>1000 V/µs) and
Low Input-Output Capacitance
(0.6 pF)
• High Speed Logic Ground
Isolation – TTL/TTL, TTL/
LTTL, TTL/CMOS, TTL/LSTTL
• Replace Pulse Transformers
– Save Board Space and Weight
• Analog Signal Ground
Isolation – Integrated Photon
Detector Provides Improved
Linearity over Phototransistor
Type
• Polarity Sensing
• Isolated Analog Amplifier –
Dual Channel Packaging
Enhances Thermal Tracking
Description
These dual channel optocouplers
contain a pair of light emitting
diodes and integrated photodetec-
tors with electrical insulation
between input and output.
Separate connection for the
photodiode bias and output
transistor collectors increase the
speed up to a hundred times that
of a conventional phototransistor
coupler by reducing the base-
collector capacitance.
Functional Diagram
ANODE 1 1
CATHODE 1 2
CATHODE 2 3
ANODE 2 4
8 VCC
7 VO1
6 VO2
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
VO
ON LOW
OFF HIGH
A 0.1 µF bypass capacitor between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1 Page 3
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-2531#XXX
020 = UL 5000 V rms/1 Minute Option*
300 = Gull Wing Surface Mount Option†
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Hewlett-Packard sales representative or authorized distributor for
information.
*For HCPL-2530/1 and HCPL-4534 only.
†Gull wing surface mount option applies to through hole parts only.
Schematic
1 IF1
+
VF1
–
2
ICC VCC
8
I O1 VO1
7
3 IF2
–
VF2
I O2
VO2
6
+
4
GND
5
HCPL-4534/0534 SHIELD
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED.
3Pages 6
Insulation and Safety Related Specifications
Parameter
Minimum External
Air Gap (External
Clearance)
Minimum External
Tracking (External
Creepage)
Minimum Internal
Plastic Gap
(Internal Clearance)
Minimum Internal
Tracking (Internal
Creepage)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
Symbol
L(101)
L(102)
CTI
8-Pin DIP
(300 Mil)
Value
7.1
7.4
0.08
NA
200
IIIa
SO-8
Value
4.9
4.8
Units
Conditions
mm Measured from input terminals to output to
to output terminals, shortest distance through
air.
mm Measured from input terminals to output
terminals, shortest distance path along body.
0.08 mm Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity.
NA mm Measured from input terminals to output
terminals, along internal cavity.
200 Volts DIN IEC 112/VDE 0303 Part 1
IIIa Material Group (DIN VDE 0110, 1/89, Table 1)
Option 300 - surface mount classification is Class A in accordance with CECC 00802.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Average Forward Input Current
(each channel)
Peak Forward Input Current (each channel)
(50% duty cycle, 1 ms pulse width)
Peak Transient Input Current (each channel)
(≤ 1 µs pulse width, 300 pps)
Reverse LED Input Voltage (each channel)
Input Power Dissipation (each channel)
Average Output Current (each channel)
Peak Output Current
Supply Voltage (Pin 8-5)
Output Voltage (Pins 7-5, 6-5)
Output Power Dissipation (each channel)
Lead Solder Temperature
(Through-Hole Parts Only)
1.6 mm below seating plane, 10 seconds
Reflow Temperature Profile
Symbol
TS
TA
IF(AVG)
Device
Min.
-55
- 55
Max.
125
100
25
Units
°C
°C
mA
Note
IF(PEAK)
50 mA
IF(TRANS)
1A
VR
PIN
IO(AVG)
IO(PEAK)
VCC
VO
PO
5V
45 mW
8 mA
16 mA
-0.5 30
V
-0.5 20
V
35 mW 13
TLS 8 Pin DIP
260 °C
TRP SO-8 and See Package Outline
Option 300 Drawings section
6 Page | |||
ページ | 合計 : 12 ページ | ||
|
PDF ダウンロード | [ HCPL-0531 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
HCPL-0530 | Single Channel/ High Speed Optocouplers | Agilent(Hewlett-Packard) |
HCPL-0530 | Dual Channel/ High Speed Optocouplers | Agilent(Hewlett-Packard) |
HCPL-0530 | High Speed Optocouplers | HP |
HCPL-0531 | Single Channel/ High Speed Optocouplers | Agilent(Hewlett-Packard) |