DataSheet.jp

G4Q の電気的特性と機能

G4QのメーカーはOmronです、この部品の機能は「Ratchet Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 G4Q
部品説明 Ratchet Relay
メーカ Omron
ロゴ Omron ロゴ 




このページの下部にプレビューとG4Qダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

G4Q Datasheet, G4Q PDF,ピン配置, 機能
G4QRatchet Relay
Unique Ratchet Mechanism Assures Positive
Alternate Transfer/Switching Operation
• Each contact in the double-pole contact mechanism performs
alternate make-brake operation at each pulse input and is thus
ideal for alternate operation or transfer/switching operation of a
motor.
• Positive operation is assured due to the unique ratchet mecha-
nism.
• Satisfies dielectric strength of 2,000 VAC.
• Low power consumption.
(AC: approx. 6.4 VA; DC: approx. 3.9 W)
Ordering Information
CSM_G4Q_DS_E_3_2
Open Models
Item
Basic model
Model
G4Q-211A
DPDT
Rated voltage
24 VAC
50 VAC
100/(110) VAC
200/(220) VAC
12 VDC
24 VDC
100 VDC
Plug-in Models
Item
Basic model
Model
G4Q-212S
Note:
When ordering, add the rated coil voltage (listed in Specifications) to the model number.
Example: G4Q-211A, 24 VAC
Rated coil voltage
Model Number Legend
G4Q-@@@@
1 23 4
1. Contact Form
2: DPDT
2. Contact Type
1: Single
3. Enclosure Construction
1: No casing
2: Casing
4. Terminal Shape
A: Solder
S: Plug-in
DPDT
Rated voltage
12 VAC
24 VAC
50 VAC
100/(110) VAC
200/(220) VAC
12 VDC
24 VDC
100 VDC
200 VDC
1

1 Page





G4Q pdf, ピン配列
G4Q
Characteristics
Contact resistance (See note 2.)
Operate time (See note 3.)
Max. operating frequency
Insulation resistance (See note 4.)
Dielectric strength
Vibration resistance
Shock resistance
Endurance
Error rate (See note 6.)
Ambient temperature
Ambient humidity
Weight
50 mmax.
60 ms max.
Mechanical: 1,200 operations/hr
Electrical: 1,200 operations/hr (under rated load)
100 Mmin. (at 500 VDC)
2,000 VAC, 50/60 Hz for 1 min between coil and contact (1,000 VAC, 50/60 Hz for 1 min between con-
tacts of same polarity) (2,000 VAC between contacts of different polarities)
Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude)
Destruction: 500 m/s2
Malfunction: 100 m/s2
Mechanical: 5,000,000 operations min. (at operating frequency of 1,200 operations/hr)
Electrical:
500,000 operations min. (under rated load and at operating frequency of
1,200 operations/hr) (See note 5.)
1 A at 5 VDC (0.1 A at 5 VDC)
Operating: –10°C to 55°C (with no icing or no condensation)
Operating: 5% to 85%
Open model: Approx. 240 g; cased model: Approx. 340 g
Note: 1. The data shown above are initial values.
2. The contact resistance was measured with 0.1 A at 5 VDC using the voltage drop method.
3. The operate time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature of 23°C.
4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric
strength.
5. The electrical endurance was measured at an ambient temperature of 23°C.
6. This value was measured at a switching frequency of 60 operations per minute. The value in parentheses is for the cased model.
Engineering Data
Maximum Switching Power
DC resistive load AC resistive load
AC inductive load
(cosφ = 0.4)
DC inductive load
L/R = 7 ms
Electrical Endurance
10,000
7,000
5,000
3,000
220 VAC resistive load
24 VDC resistive load
1,000
700
500
300
24VDC inductive load
L/R = 7 ms
100
70
50
220 VAC inductive load
(cosφ = 0.4)
30
Switching voltage (V)
Switching current (A)
3


3Pages


G4Q 電子部品, 半導体
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
2015.10
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2015 All Right Reserved.

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ G4Q データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
G40

Voltage-Controlled Attenuator Module

Tyco Electronics
Tyco Electronics
G4000EC450

Anode Shorted Gate Turn-Off Thyristor

IXYS
IXYS
G400SD

SCHOTTKY BARRIER DIODE

GTM
GTM
G401SD

SCHOTTKY BARRIER DIODE

GTM
GTM


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap