DataSheet.jp

BA33C18FP の電気的特性と機能

BA33C18FPのメーカーはROHM Semiconductorです、この部品の機能は「2-output LDO series regulator」です。


製品の詳細 ( Datasheet PDF )

部品番号 BA33C18FP
部品説明 2-output LDO series regulator
メーカ ROHM Semiconductor
ロゴ ROHM Semiconductor ロゴ 




このページの下部にプレビューとBA33C18FPダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

BA33C18FP Datasheet, BA33C18FP PDF,ピン配置, 機能
2-output LDO series regulator
BA33C18FP/HFP
Description
BA33C18FP/HFP is a 2-output LDO series regulator IC.
Output current is 1A at maximum and output voltage
accuracy is +/-2%. This IC incorporates over-current
protection and thermal protection circuits.
Dimension (Unit : mm)
BA33C18FP
6.5±0.2
5.1+−00..21
2-C0.5
2.3±0.2
0.5±0.1
Features
1) 3.3V/1A, 1.8V/1A
2) Output voltage accuracy: +/-2%
3) PNP output and LDO voltage type
4) Built-in output current limit circuit protects the IC
from destruction by short
5) Built-in temperature protection circuit protects the IC
from thermal destruction by overload state
6) TO252-5 package, HRP-5 package
123
45
0.5 1.27
TO252-5
0.5±0.1
1.0±0.2
BA33C18HFP
9.39±0.125
8.82±0.1
(5.59)
1.905±0.1
Applications
DVD-ROM, DVD-RW, HDD
Absolute Maximum Ratings (Ta=25˚C)
Parameter
Symbol
Limits
Applied voltage
Power dissipation
VCC
Pd
18
2300
1
Operating temperature range Topr
-40 ~ +105
Storage temperature range
Tstg
-55 ~ +150
∗1 Derating : 18.4mW/˚C for operation above Ta 25˚C
PCB (70mmx70mm, t=1.6mm) glass epoxy mounting. (Thermal via on the board.)
(Board surface copper foil area: 10.5mmX10.5mm)
(2 layer board (Back copper foil area: 15mmX15mm)
Recommended Operating Conditions (Ta=25˚C)
Parameter
Symbol Min.
Input supply voltage
VCC 4.1
3.3V output current
Io1 -
1.8V output voltage
Io2 -
Typ.
-
-
-
Max.
16.0
1
1
1.2575
1
234 5
1.72
0.73±0.1
D 0.08 S
HRP-5
Unit
V
mW
˚C
˚C
Unit
V
A
A
4.5°
+
54..55°°
0.27
+
00..015
S

1 Page





BA33C18FP pdf, ピン配列
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ BA33C18FP データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BA33C18FP

2-output LDO series regulator

ROHM Semiconductor
ROHM Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap