DataSheet.jp

HK19F-DC6V の電気的特性と機能

HK19F-DC6VのメーカーはHUI KEです、この部品の機能は「Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 HK19F-DC6V
部品説明 Relay
メーカ HUI KE
ロゴ HUI KE ロゴ 




このページの下部にプレビューとHK19F-DC6Vダウンロード(pdfファイル)リンクがあります。
Total 7 pages

No Preview Available !

HK19F-DC6V Datasheet, HK19F-DC6V PDF,ピン配置, 機能
H U IK E
1. 安全认证:
Safety Standard:
C-UL CQC TUV
HK19F
Page: 1
2. 接点规格:
Contact Specification:
2.1 接点间隙:
Contact Gap:
2.2 接点阻抗:
Contact Resistance
2.3 接点容量:
Contact Capacity:
最小 0.15mm
0.15mm Minimum.
初始值最大 100m
流通电流 1A、开路测试电压: 6VDC
使用电压下降法量测。
Maximum 100mat initial value.
Test Current: 1A, Open Circuit Test Voltage: 6VDC.
By using Voltage Drop Method.
125VAC Cosφ=1,可通过电流为 1 安培。
24VDC,可通过电流为 1 安培。
1 Amps at 125VAC Cosφ=1.
1Amps at 24VDC .
3. 摄氏 20 度之线圈规格:
Coil Specification at 20 °C:
3.1 额定电压:
Rated Voltage:
3.2 额定电流:( mA± 10%)
Nominal Current:
3.3 额定消耗功率:
10%.)
Rated Power
Consumption:
3.4 线圈阻抗: (± 10%.)
Coil Resistance:
3VDC. 5VDC.
6VDC.
9VDC.
12VDC.
24VDC
50/67/120 29.9 /40/72 25/33.3/60 16.7/22.5/40 12.5/16.7/30 6.25/8.3/15
0.15W/0.2W0.36W
60/45/25 167/125/70 240/180/100 540/400/220 960/720/400 3840/2880/1600
3.5 感动电压:
Pull In Voltage:
(当电压渐渐施加于继电器时接点之动作电压,为额定电压之 80%)
V DC
(Contact operating voltage when voltage is gradually applied. It is 80% of
the Rated Voltage) V DC
3.6 开放电压:
Drop Out Voltage:
(当额定电压渐渐的减少时接点放开之电压,为额定电压之 10%) VDC
(Contact breaking voltage when rated voltage is gradually reduced. It is
10% of the Rated Voltage) VDC
3.7 最大应加电压:
Max. Allowable
Voltage:
(为额定电压之 130%) V DC
(130% of the Rated Voltage) V DC
3.8 动作时间:
Operate Time:
在施加额定电压时最大为 6milliseconds
6milliseconds Maximum when rated Voltage is applied.
深圳市启博电子科技有限公司
Http:// www.cnomron.com
总机:0755-282363182823632828236338
深圳市宝安区新湖路华丰科技园华美居商务中心B412B
传真:0755-28236462

1 Page





HK19F-DC6V pdf, ピン配列
H U IK E
4.4 振动测试:
Vibration
HK19F
Page: 3
4.4.1 振动 I(强度):
Endurance I:
在无激磁状态下双振幅宽度为 1.5mm,震动频率在一分钟内由
10HZ~55HZ~10HZXYZ 各方向各进行 2 小时,共六小时,实验后外观构造不
可异常,且电气功能需符合规格之要求。
The Coil shall be maintained under not energized condition, double amplitude
1.5 mm, the entire frequency range changes from 10 to 55 Hz then returns to
10 Hz shall be made in 1 minute. This motion shall be applied for a period of
2 hours in each of 3 mutually perpendicular axis (a total of 6 hours) There
should not be any deformations in construction and in appearance, while the
Electrical Specifications should be fulfilled after the test.
4.4.2 振动 II (稳定性):
Endurance II
(Error Operation):
在激磁状态下双振幅宽度是 1.5mm,震动频率在一分钟内由
10HZ~55HZ~10HZXYZ 各方向进行 5 分钟,实验中不得有误(接点断开时间不
可超过 1 mS)。实验后外观,构造不可异常,且电气功能需符合规格之要求。
The Coil shall be maintained under energized condition, double amplitude 1.5
mm, the entire frequency range changes from 10 to 55 Hz then returns to 10
Hz shall be made in 1 minute. This motion shall be applied for a period of 5
minutes in 3 mutually perpendicular axis. Malfunction is not allowed during
the test (contact breaking time should be less than 1 millisecond) In addition,
there should not be any deformations in construction and in appearance while
the Electrical Specifications should be fulfilled after the test.
4.5 冲击测试:
Shock:
4.5.1 耐冲击性 (I 强度):
Endurance I:
在无激磁状态加速度 1000m/s2 冲击情况下,XYZ 各方向进行 5 次,实验后外观,
构造不可异常,且电气功能需符合规格之要求。
Peak Acceleration: 1000m/s2
The Coil shall be maintained under not energized condition, 5 successive
shocks shall be applied in 3 mutually perpendicular axis. There should not be
any deformations in construction and in appearance while the Electrical
Specifications should be fulfilled after the test.
4.5.2 耐冲击性 II (稳定
):
Endurance II
(Error Operation):
在激磁状态加速度 100m/s2 冲击情况下,XYZ 各方向进行 2 次,实验中不得有
(接点断开时间不可超过 1 mS),实验后外观,构造不可异常,且电气功能需
符合规格之要求。
Peak Acceleration: 100m/s2
The Coil should be maintained under energized condition, 2 successive
shocks shall be applied in 3 mutually perpendicular axis. Malfunction is not
allowed during the test (contact breaking time should be less than 1
millisecond) In addition, there should not be any deformations in construction
and in appearance while the Electrical Specifications should be fulfilled after
the test.
5. 环境特性:
Environmental
Characteristics:
5.1 温度范围:
Temperature Range:
深圳市启博电子科技有限公司
Http:// www.cnomron.com
总机:0755-282363182823632828236338
深圳市宝安区新湖路华丰科技园华美居商务中心B412B
传真:0755-28236462


3Pages


HK19F-DC6V 電子部品, 半導体
H U IK E
产品编号方式:
Ordering Information:
HK19F -DC 12V -S D A X X
特殊标记
Special Request Code
安装方式
Mounting Termination
触点转换形式
Contact Form
线圈功耗
Coil Power
封装方式
Type Of Sealing
线圈电压
Coil Voltag
线圈性质
CoilType
产品型号
Type
HK19F
Page: 6
G:环保产品
GRoHS
:PCB
NIL:PCB
:1FormC
无:0.36W
NIL:0.36
NIL:1FormC
H0.2W D0.15W
H0.2W D0.15W
无:半密封型 S:密封型
Nil:Flow Solder Type
S:Plastic Sealed Type
3V5V6V9V12V24V
3V5V 6V9V12V24V
DC:直流
DC
HK19F
HK19F
外型尺寸 (mm)
深圳市启博电子科技有限公司
Http:// www.cnomron.com
总机:0755-282363182823632828236338
深圳市宝安区新湖路华丰科技园华美居商务中心B412B
传真:0755-28236462

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ HK19F-DC6V データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HK19F-DC6V

Relay

HUI KE
HUI KE
HK19F-DC6V

SUBMINIATURE DIP RELAY

EVER-WAY INDUSTRY
EVER-WAY INDUSTRY


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap