|
|
Datasheet MM1Z33 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | MM1Z33 | Silicon Zener Diode, Rectifier MM1Z2V0~MM1Z75
SILICON PLANAR ZENER DIODES
Features • Total power dissipation: max. 500 mW • Small plastic package suitable for
surface mounted design • Tolerance approximately ± 5%
Absolute Maximum Ratings (Ta = 25 OC) Parameter
Power Dissipation Junction Temperature Storage Temperature Rang | SEMTECH | diode |
2 | MM1Z33 | Silicon Zener Diode, Rectifier SILICON PLANAR ZENER DIODES
Features • Total power dissipation: max. 500 mW • Small plastic package suitable for
surface mounted design • Tolerance approximately ± 5%
Absolute Maximum Ratings (Ta = 25 OC) Parameter
Power Dissipation Junction Temperature Storage Temperature Range
Characteristi | Jin Yu | diode |
3 | MM1Z33 | Silicon Zener Diode, Rectifier 1.65(.065) 1.55(.061)
MM1Z2V0~MM1Z120
SILICON PLANAR ZENER DIODES Silicon planar zener diode in a small plastic
Cathode 1
2 Anode
3.9(0.154) 3.7(0.146)
2.7(0.106) 2.6(0.102)
Dimensions in millimeters and (inches)
.135(.005) .127(.004)
0.6(.023) 0.5(.020)
1.15(.045) 1.05(.041)
Dimensions in | MDD | diode |
4 | MM1Z33 | ZENER DIODES www.eicsemi.com
MM1Z2V4 - MM1Z75
VZ : 2.4 to 75 V PD : 500 mW
FEATURES :
* Total Power Dissipation 500 mW * Wide Zener Reverse Voltage Range 2.4 V to 75 V * Package Designed for Optimal Automated Board Assembly * Small Package Size for High Density Applications * Pb / RoHS Free
1.65 1.55
ZENER DIO | EIC | diode |
5 | MM1Z33 | SILICON PLANAR ZENER DIODES MM1Z2V0~MM1Z75
SILICON PLANAR ZENER DIODES
Features • Total power dissipation: max. 500 mW • Small plastic package suitable for surface mounted design • Tolerance approximately ± 5%
PINNING PIN 1 2
1
DESCRIPTION Cathode Anode
2
Top View Simplified outline SOD-123 and symbol
Absolute Maxi | ETC | diode |
MM1 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | MM1 | Diode (spec sheet) American Microsemiconductor diode | | |
2 | MM1002 | Video Amplifier MITSUMI
Video Amplifier MM1002
Video Amplifier
Monolithic IC MM1002
Outline
This IC is a video amplifier that can perform superimpose. It has a built-in 75Ω driver.
Features
1. 2. 3. 4. 5. 6. 7. 8. 9. Built-in superimpose function Built-in Y-C mix circuit Vertical/horizontal sync signal output MITSUMI amplifier | | |
3 | MM1002F | Video Amplifier MITSUMI
Video Amplifier MM1002
Video Amplifier
Monolithic IC MM1002
Outline
This IC is a video amplifier that can perform superimpose. It has a built-in 75Ω driver.
Features
1. 2. 3. 4. 5. 6. 7. 8. 9. Built-in superimpose function Built-in Y-C mix circuit Vertical/horizontal sync signal output MITSUMI amplifier | | |
4 | MM1007 | HBS-Compatible Driver and Receiver MITSUMI
HBS-Compatible Driver and Receiver MM1007
HBS-Compatible Driver and Receiver
Monolithic IC MM1007
Outline
This IC conforms to the HBS (Home Bus) specification (Electronic Industries Association of Japan), and has functions for the reception and transmission of data. AMI is adopted for the MITSUMI driver | | |
5 | MM1024 | S Video Amplifier Monolithic IC MM1024 MITSUMI
S Video Amplifier MM1024
S Video Amplifier
Monolithic IC MM1024
Outline
This is a video amp IC that supports S and also has border and superimpose functions. Amp gain is as follows : 6dB for Y signal amplification, 10dB for C signal amplification and 6dB for composite signal amplification ETC amplifier | | |
6 | MM1024AF | S Video Amplifier Monolithic IC MM1024 MITSUMI
S Video Amplifier MM1024
S Video Amplifier
Monolithic IC MM1024
Outline
This is a video amp IC that supports S and also has border and superimpose functions. Amp gain is as follows : 6dB for Y signal amplification, 10dB for C signal amplification and 6dB for composite signal amplification ETC amplifier | | |
7 | MM1025 | Monolithic IC MITSUMI
System Reset (with battery back-up) MM1025, 1174
System Reset (with battery back-up)
Monolithic IC MM1025, 1174
Outline
These ICs were developed for D-RAM and dummy S-RAM battery back-up. D-RAM and dummy S-RAM power supplies differ from that of S-RAMs because 5V or 3.3V of power supply is MITSUMI ELECTRIC battery | |
Esta página es del resultado de búsqueda del MM1Z33. Si pulsa el resultado de búsqueda de MM1Z33 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |