DataSheet.es    


PDF IS62WV12816EBLL Data sheet ( Hoja de datos )

Número de pieza IS62WV12816EBLL
Descripción ULTRA LOW POWER CMOS STATIC RAM
Fabricantes ISSI 
Logotipo ISSI Logotipo



Hay una vista previa y un enlace de descarga de IS62WV12816EBLL (archivo pdf) en la parte inferior de esta página.


Total 17 Páginas

No Preview Available ! IS62WV12816EBLL Hoja de datos, Descripción, Manual

IS62/65WV12816EALL
IS62/65WV12816EBLL
128Kx16 LOW VOLTAGE,
ULTRA LOW POWER CMOS STATIC RAM
PRELIMINARY INFORMATION
DECEMBER 2014
KEY FEATURES
High-speed access time: 45ns, 55ns
CMOS low power operation
36 mW (typical) operating
9 µW (typical) CMOS standby
TTL compatible interface levels
Single power supply
1.65V-2.2V VDD (IS62/65WV12816EALL)
2.2V-3.6V VDD (IS62/65WV12816EBLL)
Three state outputs
Industrial and Automotive temperature support
2CS Option Available
Lead-free available
BLOCK DIAGRAM
DESCRIPTION
The ISSI IS62/65WV12816EALL/EBLL are high-speed,
2M bit static RAMs organized as 128K words by 16 bits.
It is fabricated using ISSI's high-performance CMOS
technology. This highly reliable process coupled with
innovative circuit design techniques, yields high-
performance and low power consumption devices.
When
is HIGH (deselected) or when CS2 is
LOW (deselected) or when
is LOW, CS2 is
HIGH and both and
are HIGH, the device
assumes a standby mode at which the power
dissipation can be reduced down with CMOS input
levels.
Easy memory expansion is provided by using Chip
Enable and Output Enable inputs. The active LOW
Write Enable
controls both writing and reading
of the memory. A data byte allows Upper Byte
and Lower Byte ( access.
The IS62/65WV12816EALL/EBLL are packaged in the
JEDEC standard 48-pin mini BGA (6mm x 8mm) and
44-Pin TSOP (TYPE II).
A0 A16
DECODER
128K x 16
MEMORY
ARRAY
VDD
GND
I/O0 I/O7
Lower Byte
I/O8 I/O15
Upper Byte
I/O
DATA
CIRCUIT
COLUMN I/O
CS2
CS1#
OE#
WE#
UB#
LB#
CONTROL
CIRCUIT
Copyright © 2014 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time
without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to
obtain the latest version of this device specification before relying on any published information and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can
reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such
applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Integrated Silicon Solution, Inc.- www.issi.com
Rev. 0B
12/9/2014
1

1 page




IS62WV12816EBLL pdf
IS62/65WV12816EALL
IS62/65WV12816EBLL
ELECTRICAL CHARACTERISTICS
IS62(5)WV12816EALL DC ELECTRICAL CHARACTERISTICS-I (OVER THE OPERATING RANGE)
Symbol
VOH
VOL
VIH(1)
VIL(1)
ILI
ILO
Parameter
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage
Input Leakage
Output Leakage
Test Conditions
IOH = -0.1 mA
IOL = 0.1 mA
GND < VIN < VDD
GND < VIN < VDD, Output Disabled
Min.
1.4
1.4
0.2
1
1
Max.
0.2
VDD + 0.2
0.4
1
1
Unit
V
V
V
V
µA
µA
Notes:
1. VILL(min) = -1.0V AC (pulse width < 10ns). Not 100% tested.
VIHH (max) = VDD + 1.0V AC (pulse width < 10ns). Not 100% tested.
IS62(5)WV12816EBLL DC ELECTRICAL CHARACTERISTICS-I (OVER THE OPERATING RANGE)
Symbol
VOH
Parameter
Output HIGH Voltage
VOL
VIH(1)
VIL(1)
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage
ILI Input Leakage
ILO Output Leakage
Test Conditions
2.2 VDD < 2.7, IOH = -0.1 mA
2.7 VDD 3.6, IOH = -1.0 mA
2.2 VDD < 2.7, IOL = 0.1 mA
2.7 VDD 3.6, IOL = 2.1 mA
2.2 VDD < 2.7
2.7 VDD 3.6
2.2 VDD < 2.7
2.7 VDD 3.6
GND < VIN < VDD
GND < VIN < VDD, Output Disabled
Min.
2.0
2.4
1.8
2.2
0.3
0.3
1
1
Max.
0.4
0.4
VDD + 0.3
VDD + 0.3
0.6
0.8
1
1
Unit
V
V
V
V
V
V
V
V
µA
µA
Notes:
1. VILL(min) = -2.0V AC (pulse width < 10ns). Not 100% tested.
VIHH (max) = VDD + 2.0V AC (pulse width < 10ns). Not 100% tested.
Integrated Silicon Solution, Inc.- www.issi.com
Rev. 0B
12/9/2014
5

5 Page





IS62WV12816EBLL arduino
IS62/65WV12816EALL
IS62/65WV12816EBLL
WRITE CYCLE NO. 3 ( CONTROLLED:
ADDRESS
LOW
IS LOW DURING WRITE CYCLE)
tWC
tSCS1
tHA
tSCS2
CS2
tAW
tPWE
tPWB
DOUT
DIN
tSA tHZWE
DATA UNDEFINED(1)
DATA UNDEFINED(1)
HIGH-Z
tSD
tLZWE
tHD
DATA VALID
Notes:
1. If is low during write cycle, tHZWE must be met in the application. Do not apply input signal during this period. Data output from the previous
READ operation will drive IO BUS.
Integrated Silicon Solution, Inc.- www.issi.com
Rev. 0B
12/9/2014
11

11 Page







PáginasTotal 17 Páginas
PDF Descargar[ Datasheet IS62WV12816EBLL.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IS62WV12816EBLLULTRA LOW POWER CMOS STATIC RAMISSI
ISSI

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar