|
|
S6503のメーカーはKODENSHIです、この部品の機能は「Power Factor Collector」です。 |
部品番号 | S6503 |
| |
部品説明 | Power Factor Collector | ||
メーカ | KODENSHI | ||
ロゴ | |||
このページの下部にプレビューとS6503ダウンロード(pdfファイル)リンクがあります。 Total 14 pages
S6503/P
Power Factor Collector
Description
It is Adaptable to a Discontinuous Mode of Operation that the S6503/P is Advanced PFC (Power Factor
Correction) Controller for the High Density Switching Mode Power Supply and Electronic Ballast systems.
The Bulky External components are eliminated in the Internal Start-up circuits, though it is taken in
Independent Boost Converter Operation. What is more, instead of the External components, the Low
Pass Filter is mounted in Internal Current Sense block. Internal Clamping of the Error Amplifier and
Multiplier Output improve turn on Overshoot Characteristics and Current Limiting. The One of features is
able to prevent Abnormal Condition, Open Lamp & Over Voltage.
Features
• Very Precise Adjustable Output OVP (Dynamic & Static OVP Function)
• Extremely Low Start-Up Current
• Low Operating Supply Current
• Internal Start-Up Timer
• Power Factor Maximizer & THD Minimizer Circuit
• Complete Wide Range Operation
• Feedback Open Protection
• Minimum On Timer
• Current Sense Filter On Chip
• Disable Function
• Extremely Minimized External Part Counts High Speed Response Time
Applications
• Switching Mode Power Supply (SMPS)
• Electronic Ballast
Ordering Information
Type NO.
S6503
S6503P
Marking
S6503
S6503
Package Code
SOP-8
DIP - 8
KSD-I1E004-002
1
1 Page Absolute Maximum Ratings
Characteristics
Maximum Supply Voltage
Output Peak Current
Analog Input & Output (Pin 1,2,3,4,5)
ZCD Input Maximum Current
Power Dissipation
Operating Junction Temperature
Storage Temperature
S6503/P
Symbol
VCCMAX
IPEAK
VINMAX
IZCD
PDMAX
SOP-8
DIP-8
Tj
Tstg
Value
27
±500
-0.3 ~ 7
±10
600
800
-35 ~ 150
-55 ~ 150
Unit
V
㎃
V
㎃
㎽
℃
℃
Electrical Characteristics
(Ta = -25℃ to 125℃, VCC=14V unless otherwise specified.)
Characteristics
Symbol Test Condition
Min.
Typ.
Max.
Unit
Supply Voltage & Current Section
VCC Turn-On Threshold
VCC Turn-Off Threshold
Hysteresis Voltage
VCC(On)
VCC(Off)
HYS
Start-Up Current
Quiescent Current
Operating Supply Current
Operating Current at OVP
Operating Current at Disable
IST
IQ
ICC
ICC_OVP
ICC_DIS
Error Amplifier Section
Input Voltage
Line Regulation
Input Bias Current
Open Loop Gain
VINV
dVINV
IINV
Av
Gain Bandwidth
GB
Output Source Current
Output Sink Current
Upper Clamp Voltage
Lower Clamp Voltage
Feedback Open Protection
Threshold Voltage
ISOURCE
ISINK
VUPPER
VLOWER
Vfo
VCC Increasing
VCC Decreasing
Before Turn-On
No Switching
CL=1nF, fsw=50KHz
VINV=2.7V
VZCD<150mV
Ta=25℃
VCC=12 ~27V
VCOMP=4V,VINV=2.4V
VCOMP=4V,VINV=2.6V
IO=-100uA,VINV=2.4V
IO=100uA, VINV=2.6V
VINV Decreasing
11 12
13
8.7 9.5 10.3
2 2.5
3
20 40
70
14 6
25 8
0.5 2
4
0.5 2
4
2.465 2.5 2.535
- 0.1 5
-0.5 -0.1
0.5
60 80
-
-1
-
-2 -4
-
35
-
- 5.6
-
- 2.25
-
150 200 250
V
V
V
㎂
㎃
㎃
㎃
㎃
V
㎷
㎂
㏈
㎒
㎃
㎃
V
V
㎷
KSD-I1E004-002
3
3Pages Application Information
1. Main Inductor
L = η × (VO −VP ) ×VP2 /(4VO × PO × f )
Where,
η: Efficiency (0.95)
VO: DC Link Voltage
VP: Input Peak Voltage
PO: Output Power
f: Switching Frequency
2. Resistor for Current Sense
RS = 1.75/ILP
Where,
ILP: Inductor Peak Current
3. Resistor for Multiplier
RML<0.69 x RMU / (VP– 0.69)
Where,
RMU: Under Resistor for Multiplier Input
RML: Lower Resistor for Multiplier Input
4. Resistor for Error Amplifier
REL = 2.5 x REU / (VO – 2.5)
Where,
REU: Under Resistor for Error Amplifier Inverting Input
REL: Lower Resistor for Error Amplifier Inverting Input
S6503/P
KSD-I1E004-002
6
6 Page | |||
ページ | 合計 : 14 ページ | ||
|
PDF ダウンロード | [ S6503 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
S6500 | POWER FACTOR CORRECTOR | AUK corp |
S6500P | POWER FACTOR CORRECTION | AUK corp |
S6503 | Power Factor Collector | KODENSHI |
S6503P | Power Factor Collector | KODENSHI |