DataSheet.jp

1N6376 の電気的特性と機能

1N6376のメーカーはVishayです、この部品の機能は「TVS Diode ( Rectifier )」です。


製品の詳細 ( Datasheet PDF )

部品番号 1N6376
部品説明 TVS Diode ( Rectifier )
メーカ Vishay
ロゴ Vishay ロゴ 




このページの下部にプレビューと1N6376ダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

1N6376 Datasheet, 1N6376 PDF,ピン配置, 機能
www.vishay.com
ICTE5 thru ICTE18C, 1N6373 thru 1N6386
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
Case Style 1.5KE
PRIMARY CHARACTERISTICS
VWM
5.0 V to 18 V
VBR (uni-directional)
6.0 V to 21.2 V
VBR (bi-directional)
9.2 V to 21.2 V
PPPM
1500 W
PD 6.5 W
IFSM
200 A
TJ max.
175 °C
Polarity
Uni-directional, bi-directional
Package
1.5KE
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C suffix (e.g. ICTE18C).
Electrical characteristics apply in both directions.
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
MECHANICAL DATA
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 8)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 100 A for uni-directional only
Operating junction and storage temperature range
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
(2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
SYMBOL
PPPM
IPPM
PD
IFSM
VF
TJ, TSTG
LIMIT
1500
See next table
6.5
200
3.5
- 55 to + 175
UNIT
W
A
W
A
V
°C
Revision: 18-Sep-12
1 Document Number: 88356
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1 Page





1N6376 pdf, ピン配列
www.vishay.com
ICTE5 thru ICTE18C, 1N6373 thru 1N6386
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
10
1
100 000
10 000
1000
Measured at
Zero Bias
Measured at Stand-Off
Voltage VWM
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.1
0.1 µs
1.0 µs
10 µs 100 µs 1.0 ms
td - Pulse Width (s)
10 ms
Fig. 1 - Peak Pulse Power Rating Curve
100
1.0
10 100 200
VBR - Breakdown Voltage (V)
Fig. 4 - Typical Junction Capacitance Uni-Directional
100
75
50
25
0
0 25 50 75 100 125 150 175 200
TJ - Initial Temperature (°C)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
100 000
Measured at
Zero Bias
Bi-Directional Type
10 000
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
1000
100
1.0
Measured at Stand-Off
Voltage VWM
10 100
VBR - Breakdown Voltage (V)
200
Fig. 5 - Typical Junction Capacitance
150
tr = 10 µs
TJ = 25 °C
Pulse Width (td)
is defined as the Point
Peak Value
where the Peak Current
100 IPPM
decays to 50 % of IPPM
Half Value - IPP
IPPM
2
50
10/1000 µs Waveform
as defined by R.E.A.
td
0
0 1.0 2.0 3.0
t - Time (ms)
Fig. 3 - Pulse Waveform
4.0
200
TJ = TJ max.
8.3 ms Single Half Sine-Wave
100
50
10
1
5 10
50
Number of Cycles at 60 Hz
100
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Uni-Directional Only
Revision: 18-Sep-12
3 Document Number: 88356
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ 1N6376 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
1N6370

Transient Voltage Suppressor

Digitron Semiconductors
Digitron Semiconductors
1N6370

1500 Watt Low Clamping Factor Transient Voltage Suppressor

Microsemi
Microsemi
1N6371

1500 Watt Low Clamping Factor Transient Voltage Suppressor

Microsemi
Microsemi
1N6372

1500 Watt Low Clamping Factor Transient Voltage Suppressor

Microsemi
Microsemi


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap