DataSheet.jp

ADG5401 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ADG5401
部品説明 Single SPST Switch
メーカ Analog Devices
ロゴ Analog Devices ロゴ 



Total 17 pages
		

No Preview Available !

ADG5401 Datasheet, ADG5401 PDF,ピン配置, 機能
Data Sheet
FEATURES
Latch-up immune under all circumstances
Human body model (HBM) ESD rating: 8 kV
Low on resistance: 6.5 Ω
±9 V to ±22 V dual-supply operation
9 V to 40 V single-supply operation
48 V supply maximum ratings
Fully specified at ±15 V, ±20 V, +12 V, and +36 V
VDD to VSS analog signal range
APPLICATIONS
High voltage signal routing
Automatic test equipment
Analog front-end circuits
Precision data acquisition
Amplifier gain select
Industrial instrumentation
Relay replacement
GENERAL DESCRIPTION
The ADG5401 is a monolithic industrial, complementary metal
oxide semiconductor (CMOS) analog switch containing a latch-
up immune single-pole/single-throw (SPST) switch. The switch
conducts equally well in both directions when on, and has an
input signal range that extends to the power supplies. In the off
condition, signal levels up to the supplies are blocked.
The ultralow on resistance and on-resistance flatness of these
switches make them ideal solutions for data acquisition and gain
switching applications, where low distortion is critical. The
latch-up immune construction and high ESD rating make these
switches more robust in harsh environments.
High Voltage Latch-Up Proof,
Single SPST Switch
ADG5401
FUNCTIONAL BLOCK DIAGRAM
ADG5401
SD
IN
SWITCHES SHOWN FOR A LOGIC 1 INPUT
Figure 1.
PRODUCT HIGHLIGHTS
1. Trench isolation guards against latch-up. A dielectric trench
separates the P channel and N channel transistors, thereby
preventing latch-up even under severe overvoltage
conditions.
2. Low RON of 6.5 Ω.
3. Dual-supply operation. For applications where the analog
signal is bipolar, the ADG5401 can operate from dual
supplies of up to ±22 V.
4. Single-supply operation. For applications where the analog
signal is unipolar, the ADG5401 can operate from a single-
rail power supply of up to 40 V.
5. 3 V logic compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V.
6. No VL logic power supply required.
7. Available in 8-lead MSOP package and 8-lead, 2 mm ×
3 mm LFCSP packages.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com

1 Page





ページ 合計 : 17 ページ
PDF
ダウンロード
[ ADG5401.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ADG5401

Single SPST Switch

Analog Devices
Analog Devices
ADG5404

4-Channel Multiplexer

Analog Devices
Analog Devices
ADG5404F

4-Channel Multiplexer

Analog Devices
Analog Devices
ADG5408

(ADG5408 / ADG5409) High Voltage Latch-Up Proof

Analog Devices
Analog Devices

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap