|
|
PDF IS2008 Data sheet ( Hoja de datos )
| Número de pieza | IS2008 | |
| Descripción | Bluetooth 4.1 Mono Audio SOC | |
| Fabricantes | ISSC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de IS2008 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
IS2008/10/13/15 SoC
Bluetooth® 4.1 Mono Audio SOC
Features
System Specification
Compliant with Bluetooth Specification v.4.1
(EDR) in 2.4 GHz ISM band
It supports following profiles :
- HFP 1.6
- HSP 1.1
- A2DP 1.2
- AVRCP 1.5
- SPP 1.0
- PBAP 1.0
Baseband Hardware
16MHz main clock input
Built-in internal ROM for program memory
Support to connect to two hosts ( phones,
tablets…) with HFP or A2DP profiles
simultaneously
Adaptive Frequency Hopping (AFH) avoids
occupied RF channels
Fast Connection supported
RF Hardware
Fully Bluetooth 4.1 (EDR) system in 2.4
GHz ISM band.
Combined TX/RX RF terminal simplifies
external matching and reduces external
antenna switches.
Max. +4dBm output power with 20 dB level
control from register control.
Built-in T/R switch for Class 2/3 application
To avoid temperature variation,
temperature sensor with temperature
calibration is utilized into bias current and
gain control.
Fully integrated synthesizer has been
created. There requires no external VCO,
varactor diode, resonator and loop filter.
Crystal oscillation with built-in digital
trimming for temperature/process
variations.
Audio processor
Support 64 kb/s A-Law or -Law PCM
format, or CVSD (Continuous Variable
Slope Delta Modulation) for SCO channel
operation.
Noise suppression
Echo suppression
SBC and optional AAC decoding
Packet loss concealment
Build-in four languages (Chinese/ English/
Spanish/ French) voice prompts and 20 events
for each one.
(This function can be set up in “IS20XXS_UI”
tool.)
Support SCMS-T
Audio Codec
20 bit DAC and 16 bit ADC codec
98dB SNR DAC playback
Built-in 1 channel 2.3W class-D amplifier for a
4Ω speaker (for IS2013/15S only)
Peripherals
Built-in Lithium-ion battery charger (up to
350mA)
Integrate 3V, 1.8V configurable switching
regulator and LDO
Built-in ADC for battery monitor and voltage
sense.
A line-in port for external audio input
Two LED drivers
Flexible HCI interface
High speed HCI-UART (Universal
Asynchronous Receiver Transmitter) interface
(up to 921600bps)
Package
6x6mm2 48QFN package
(IS2008S, IS2010S)
7x7mm2 56QFN package (IS2013S, IS2015S)
Description
Mono Audio Chip is a compact, highly integrated,
CMOS single-chip RF and baseband IC for
Bluetooth v4.1 with Enhanced Data Rate 2.4GHz
applications. This chip is fully compliant with
Bluetooth specification and completely
Page 1
1 page  
Mono Audio SoC
2.0 KEY FEATURES TABLE
Feature
Chip
Application
Stereo/Mono
Pin count
Dimension (mm2)
Audio DAC output
DAC (single-end) [email protected] (dB)
DAC (cap-less) [email protected] (dB)
ADC SNR @2.8V (dB)
I2S digital interface
Analog Aux- in
Mono MIC
Support external audio AMP
IS2008S IS2010S
Headset Headset
Mono
48
6x6
1-ch
-98
-96
-90
X
X
2
X
Mono
48
6x6
1-ch
-98
-96
-90
X
X
2
X
IS2013S
Speaker
Mono
56
7x7
1-ch
-98
-96
-90
X
1
IS2015S
Speaker
Mono
56
7x7
1-ch
-98
-96
-90
X
1
Build-in Class-D amplifier
UART
LED Driver
Internal DC-DC step-down regulator
DC 5V Adaptor Input
Battery Charger (350mA max)
GPIO for Application
Button support
Support NFC application
Voice prompt
Multi-tone
DSP sound effect
Profile
HFP
AVRCP
A2DP
PBAP
HSP
SPP
Note: “” means support the feature
“X” means no support the feature.
X
2
6
6
X
1.6
1.5
1.2
1.0
1.1
X
X
2
6
6
X
1.6
1.5
1.2
1.0
1.1
1.0
1-ch
2
9
6
1-ch
2
9
6
1.6 1.6
1.5 1.5
1.2 1.2
1.0 1.0
1.1 1.1
X 1.0
Page 5
5 Page 
Mono Audio SoC
Pin No.
44
45
46
47
48
49
50
51
52
53
54
55
56
57
Pin type
P
I/O
I
I
I
I
I
P
P
P
O
O
P
P
Name
VCC_RF
RTX
P0_2
P2_0
P2_7
P3_0
P0_5
VDD_IO
AVDD_CDA
VBP_CDA
HPON_CDA
HPOP_CDA
PVDD_CDA
EP
Description
RF power input (1.28V) for both synthesizer and TX/RX block; Connect to
RFLDO_O pin
RF RTX path
IO pin, default pull-high input (Note 1)
Play/Pause key (default), active low.
IO pin, default pull-high input
System Configuration,
H: Application L: Baseband(IBDK Mode)
IO pin, default pull-high input (Note 1)
Volume up key (default), active low.
IO pin, default pull-high input (Note 1)
Line-in Detector (default), active low.
IO pin, default pull-high input (Note 1)
Volume down (default), active low.
I/O power supply input (2.7~3.3V); Connect to LDO31_VO pin
Supply voltage of audio amplifier.
Reference voltage output.
Negative BTL output of channel-1
Positive BTL output of channel-1
Supply voltage of power stage ch-1
Exposed pad as ground
* I: signal input pin
* O: signal output pin
* I/O: signal input/output pin
* P: power pin
Note 1: These button or functions can be setup by “IS20XXS_UI” tool.
Page 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet IS2008.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| IS2008 | Bluetooth 4.1 Mono Audio SOC | ISSC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |