LA1784M Datasheet PDF - Sanyo Semicon Device
| Part Number | LA1784M | |
| Description | Single-Chip Tuner IC for Car Radios | |
| Manufacturers | Sanyo Semicon Device | |
| Logo |  |
|
|
There is a preview and LA1784M download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
Ordering number : ENN6039
Monolithic Linear IC
LA1784M
Single-Chip Tuner IC for Car Radios
Overview
The LA1784M integrates all six blocks required in a car
radio tuner on a single chip.
Functions
• FM front end
• FM IF
• Noise canceller
• Multiplex
• AM up-conversion
• FM/AM switch
• MRC
Features
• Improved noise reduction methods
— The FM front end provides excellent 3-signal
characteristics equivalent to those of the LA1193M.
— Superlative listenability due to improved medium and
weak field noise canceller characteristics.
— Improved separation characteristics
— Anti-birdie filter
— Improved AM and FM thermal characteristics
— Excellent FM signal meter linearity
— Modified N.C. circuit for improved noise rejection
• Double conversion AM tuner (up conversion)
Reduces the number of external components required as
compared to earlier double conversion tuners, in
particular, no crystal is required (when used in
conjunction with the LC72144).
• Sample-to-sample variation reduction circuit built into
the FM IF circuit.
(Fixed resistors are used for the SD, keyed AGC, mute
on adjustment, ATT, SNC, and HCC functions.)
• The LA1784 inherits the block arrangement of the
LA1780M and supports pin-compatible designs.
Package Dimensions
Unit:mm
3159-QIP64E
[LA1784M]
17.2
14.0 1.6
1.0 0.8
0.35 1.0
33
48
32
49
0.15
Mounted on a 40 × 80 × 1.3 mm3
glass epoxy printed circuit board
Independent IC
64
1
17
16
0.1
2.7
15.6 0.8
SANYO: QIP64E
Ambient temperature, Ta — °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
61501TN (OT) No. 6039-1/50
|
| |
 
LA1784M
Operating Characteristics and Symbols Used in the Test Circuit Diagrams
Switches (SW)
Switch on = 1, SW off = 0
There are two switches that use signal transfer.
— SW2: switches between the mixer input and the IF input.
— SW4: switches between noise canceler input and IF output + noise canceler input.
Types of SG used
PG1 (AC1)
AC2
AC3
AC4
AC5
Used for noise canceler testing. A pulse generator and an AF oscillator are required.
Used for FM front end testing. Outputs an 83 MHz signal.
Used for FM IF, noise canceler, and MPX testing. Outputs a 10.7 MHz signal. Stereo modulation must be possible.
Used for AM testing. Outputs 1 MHz and 1.4 MHz signals.
Used with the MRC. Can also be used for AF and OSC.
Power supply
VCC
VCC1
VCC2
VCC3
8V
5V
0.1 V / 0.7 V / 2 V / 4 V
0.1 V / 0.6 V / 2 V
• Switches
These levels
must be variable.
SD, stereo, seek/stop
Keyed AGC, Mute ATT
HCC, SNC, SASC (MRC)
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
Parameter
ON OFF
AM/FM switching. The FE VCC is supplied to pin 62.
FM IF switching. Pin 51/FE output
FM
FE IF OUT (A)
AM
AC3 (B)
For conversion gain testing
Conversion gain measurement (A)
Other/purposes
For switching between noise canceler input and IF output + noise canceler.
AC1 (A)
Other/purposes
High-speed SD
High-speed SD
Other/purposes
SEEK/STOP (IF BUFF ON/OFF)
STOP
Seek (IF buffer output)
MUTE ATT 200 kΩ
MUTE 200 kΩ
OFF
MUTE ATT 30 kΩ
MUTE 30 kΩ
OFF
For pilot cancellation testing
When pilot cancellation is used When pilot cancellation is not used
Mute off (pin 33)
MUTE OFF
MUTE ON
• Trimmers (variable resistors)
VR1
VR2
Separation adjustment
Pilot cancellation adjustment
Test Points
• DC voltages
VD1
VD2
VD3
VD4
VD5
VD6
VD7
FM RF AGC voltage
AM/FM SD, AM Tweet, FM stereo indicator
AM/FM S-meter
MRC output
Mute drive output
AM antenna damping voltage
N.C. Gate time
Pin 2
Pin 26
Pin 24
Pin 27
Pin 33
Pin 46
Pin 8
• AC voltages
VA1 AM/FM OSC Buff Pin 4
VA2
First IF output
Pin 53 → CF → pin 51 load level (10.7 MHz)
VA3
IF counter buffer
Pin 23 (10.7 MHz/450 kHz)
VA4 MPX OUT Left ch Pin 15 (AF)
VA5 MPX OUT Right ch Pin 16 (AF)
No. 6039-5/50
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for LA1784M electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ LA1784M.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| LA1784 | The function is Single-Chip Tuner IC for Car Radios. Sanyo Semicon Device | |
| LA1784M | The function is Single-Chip Tuner IC for Car Radios. Sanyo Semicon Device | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
LA17
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||