DataSheet.jp

3.0SMCJ15 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 3.0SMCJ15
部品説明 Surface Mount Transient Voltage Suppressor
メーカ Taiwan Semiconductor
ロゴ Taiwan Semiconductor ロゴ 

Total 4 pages
		

No Preview Available !

3.0SMCJ15 Datasheet, 3.0SMCJ15 PDF,ピン配置, 機能
3.0SMCJ SERIES
Surface Mount Transient Voltage Suppressor
Features
For surface mounted application
Low profile package
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to
BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
260OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory
Flammability Classification 94V-0
3000 watts peak pulse power capability with a 10 X 1000 us
waveform by 0.01% duty cycle
Voltage Range
5.0 to 170 Volts
3000 Watts Peak Power
SMC/DO-214AB
.129(3.27)
.118(3.0)
.245(6.22)
.220(5.59)
.103(2.62)
.079(2.00)
.280(7.11)
.260(6.60)
.012(.31)
.006(.15)
Mechanical Data
Case: Molded plastic
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 16mm tape (EIA STD RS-481)
Weight: 0.21gram
.060(1.52)
.030(0.76)
.008(.20)
.004(.10)
.320(8.13)
.305(7.75)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC, Tp=1ms
(Note 1)
Symbol
PPK
Value
Minimum 3000
Units
Watts
Steady State Power Dissipation
Pd 5 Watts
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) (Note 2, 3) - Unidirectional Only
IFSM
200 Amps
Maximum Instantaneous Forward Voltage at
100.0A for Unidirectional Only (Note 4)
VF
3.5 / 5.0
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 150
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2.
2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal.
Volts
OC
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. VF=3.5V on 3.0SMCJ5.0 thru 3.0SMCJ90 Devices and VF=5.0V on 3.0SMCJ100 thru
3.0SMCJ170 Devices.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types 3.0SMCJ5.0 through Types 3.0SMCJ170.
2. Electrical Characteristics Apply in Both Directions.
- 612 -

1 Page





ページ 合計 : 4 ページ
PDF
ダウンロード
[ 3.0SMCJ15.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
3.0SMCJ10

There is a function of 3000W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS.

Won-Top Electronics
Won-Top Electronics
3.0SMCJ10

There is a function of SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 3000 Watt Peak Power Pulse).

Pan Jit International Inc.
Pan Jit International Inc.
3.0SMCJ10

There is a function of SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0-170Volts.

Surge Components
Surge Components
3.0SMCJ10

There is a function of Surface Mount Transient Voltage Suppressor.

Taiwan Semiconductor
Taiwan Semiconductor

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap