DataSheet.jp

AH496B PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 AH496B
部品説明 LINEAR HALL-EFFECT SENSOR
メーカ NANJING AH ELECTRONICS
ロゴ NANJING AH ELECTRONICS ロゴ 

Total 2 pages
		

No Preview Available !

AH496B Datasheet, AH496B PDF,ピン配置, 機能
NANJING AH ELECTRONICS CO., LTD
AH496BAH3503
SERIES LINEAR HALL-EFFECT SENSORS
These Hall-effect sensors accurately track extremely small changes in magnetic flux density—changes
generally too small to operate Hall-effect switches. As motion detectors, gear tooth sensors, and proximity
detectors, they are magnetically driven mirrors of mechanical events. As sensitive monitors of electromagnets,
they can effectively measure a system's performance with negligible system loading while providing isolation from
contaminated and electrically noisy environments. Each Hall-effect integrated circuit includes a Hall sensing
element, linear amplifier, and emitter-follower output stage. Problems associated with handling tiny analog signals
are minimized by having the Hall cell and amplifier on a single chip. Three package styles provide a magnetically
optimized package for most applications.
FEATURES
. Extremely Sensitive
. Flat response to 23kHz
. Low-Noise Output
. 4.5V to 6V Operation
. Magnetically Optimized Package
TYPICAL APPLICATION
. Motion detector
. Gear tooth sensors
. Proximity detector
. Velocity detecting of motor bicycle
. Current detecting sensor
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol Value
Supply voltage
Vcc 12
Magnetic flux density
B Unlimited
Operating temperature range
TA -40~+125
Storage temperature range
TS
150
Unit
V
mT
FUNCTIONAL BLOCK DIAGRAM
1
1,Vcc
REG
3,Vo
3
2 2,GND
ELECTRICAL CHARACTERISTICS
Characteristics
Symbol
Test
conditions
Operating voltage
Vcc
Supply current
Icc
Linearity range
Quiescent output voltage Vout
Sensitivity
Output High Level and
Low Level
S
B=0
TA=25
AH3503
1mT=10Gs
AH496B
Min. Typ Max Min. Typ Max
4.5 -
6 4.5 - 10.5
- 9 14 - 9.0 12.0
-90 - +90 -90 - +90
2.25 2.5 2.75 2.25 2.5 2.75
7..5 13..5 17..5 23 25.0 ..27.
0.6 - 4.3 0.20 - 4.8
Unit
V
mA
mT
V
mV/mT
V
Note: All output-voltage measurement are made with a voltmeter having an input impedance of at lease 10KΩ.
1 LINEAR HALL IC

1 Page





ページ 合計 : 2 ページ
PDF
ダウンロード
[ AH496B.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
AH496B

LINEAR HALL-EFFECT SENSOR

NANJING AH ELECTRONICS
NANJING AH ELECTRONICS

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap