DataSheet.jp

114 の電気的特性と機能

114のメーカーはTELEDYNEです、この部品の機能は「ESTABLISHED RELIABILITY RELAYS」です。


製品の詳細 ( Datasheet PDF )

部品番号 114
部品説明 ESTABLISHED RELIABILITY RELAYS
メーカ TELEDYNE
ロゴ TELEDYNE ロゴ 




このページの下部にプレビューと114ダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

114 Datasheet, 114 PDF,ピン配置, 機能
CENTIGRID®
ESTABLISHED RELIABILITY
RELAYS
DPDT
SERIES
114
SERIES
DESIGNATION
114
114D
114DD
RELAY TYPE
DPDT basic relay
DPDT relay with internal diode for coil transient suppression
DPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
INTERNAL CONSTRUCTION
UPPER
STATIONARY
CONTACT
UNI-FRAME
ARMATURE
DESCRIPTION
The Series 114 Centigrid® relay is an ultraminiature, hermetically sealed,
armature relay. Its low profile height (.275") and .100" grid spaced terminals,
which precludes the need for spreader pads, make it ideal for applications
where extreme packaging density and/or close PC board spacing are required.
The basic design and internal construction are similar to the standard
Teledyne DPDT TO-5 relay (e.g., Series 412). The following unique
construction features and manufacturing techniques provide overall high
reliability and excellent resistance to environmental extremes:
LOWER
STATIONARY
CONTACT
MOVING
CONTACT
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature
(Ambient)
–65°C to +125°C
Vibration
(General Note 1)
30 g’s to 3000 Hz
Shock
(General Note 1)
75 g’s,
6 msec, half-sine
Acceleration
50 g’s
Enclosure
Hermetically sealed
Weight
0.09 oz. (2.55g) max.
• All welded construction.
• Unique uni-frame design providing high magnetic efficiency and mechanical
rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of internal
cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
The Series 114D and 114DD relays have internal discrete silicon diodes for
coil suppression and polarity reversal protection.
By virtue of its inherently low intercontact capacitance and contact circuit
losses, the 114 relay has proven to be an excellent ultraminiature RF switch
for frequency ranges well into the UHF spectrum. A typical RF application for
the 114 relay is in handheld radio transceivers, wherein the combined features
of good RF performance, small size, low coil power dissipation and high
reliability make it a preferred method of Transmit-Receive
switching (see Figure 1).
©2006 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
114 Page 1
114/0706/Q1

1 Page





114 pdf, ピン配列
SERIES 114
OUTLINE DIMENSIONS
CASE DETAIL
.375 (9.53)
SQ. MAX.
.335 (8.51)
SQ. MAX.
.275 (6.99) MAX.
WIRE LEAD .750 (19.05) MIN.
PIN: .187 (1.75) .010 (.25)
(See Notes 5 and 8)
.017
(.43)
+.002
–.001
(.05)
(.03)
DIA.
TERMINAL LOCATIONS
(Viewed from Terminals; Numbers for Reference Only)
.031 ±.003
(.79 ±.08)
.035 ±.010
(.89 ±.25)
8
71
62
53
4
.100 ±.010
(2.54 ±.25)
TYP 8 PLACES
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 μsec or transfer in excess of 1 μsec.
2. “Typical” characteristics are based on available data and are best estimates. No on-going
verification tests are performed.
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable at relay terminals due to
internal series diode. 114DD only.
5. Unless otherwise specified, relays will be supplied with either gold-plated or solder-coated
leads.
6. The slash and characters appearing after the slash are not marked on the relay.
7. Screened HI-REL versions available. Contact factory.
8.
SCHEMATIC DIAGRAMS
114
114D
114DD
SCHEMATICS ARE VIEWED
FROM TERMINALS
Established Reliability
Designator
Relay Series
Ground Pin Option
(See Appendix)
Pad Option
(See Appendix)
Teledyne Part Numbering System for T2R® Established Reliability Relay
ER 114 Z M4 - 26 A / S Q
Q= Solder Coated Leads
G= Gold Plated Leads
(Notes 5 and 6)
S= 0.187" leads
(Note 6)
Screening and Reliability
Level
Coil Voltage
Teledyne Part Numbering System for Military Qualified (JAN) Relays
J 114 Z M4 - 26 P L
Military (JAN)
Designator
Relay Series
Ground Pin Option
(See Appendix)
Pad Option
(See Appendix)
Screening and Reliability
Level
Terminal Variant
P = 0.187"
Coil Voltage
©2006 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
114 Page 3
114/0706/Q1


3Pages


114 電子部品, 半導体
Appendix A: Ground Pin Positions
Ø.200
[Ø5.08]
"Z" POSITION
"X" POSITION
"Z" POSITION
Ø.200
[Ø5.08]
36°±3°
"Y" POSITION
TO-5 Relays:
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF310, RF313,
RF320, RF323
45°±3°
"Y" POSITION
TO-5 Relays:
ER411, ER431, RF311, RF331
.100
[2.54]
.100
[2.54]
.050
[1.27]
"Y" POSITION
"W" POSITION
"Z" POSITION
"X" POSITION
.100
[2.54]
.100
[2.54]
"Y" POSITION
"Z" POSITION
.100
[2.54]
"U" POSITION
(ER116C and ER136C only)
Centigrid® Relays:
RF180, ER116C, 122C, ER136C
.100
[2.54]
Centigrid® Relays:
RF100, RF103, ER114, ER134, 172
Indicates ground pin position
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
3. Tolerances: ± .010 (±.25) unless otherwise speci¿ed
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ 114 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
11-21UYC-S530-XX-TR8

11-21UYC/S530-XX/TR8 1206 Package Chip LEDs

Everlight
Everlight
11-MD124

Bi-Directional Motor Driver

SiTi
SiTi
11-MPC-001-2-B

Power Line Filters

api
api
11-MPC-001-5-A

Power Line Filters

api
api


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap