|
|
PDF AZ2501P2 Data sheet ( Hoja de datos )
| Número de pieza | AZ2501P2 | |
| Descripción | 50 AMP LATCHING POWER RELAY | |
| Fabricantes | Zettler | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AZ2501P2 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
AZ2501P
50 AMP LATCHING
POWER RELAY
FEATURES
• 50 Amp switching
• Heavy loads to 13850 VA
• 4 kV dielectric strength
• 8 mm creepage distance
• Manual switch available
• Epoxy sealed version available
• UL, CUR file E44211
CONTACTS
Arrangement SPDT (1 Form C),
SPST (1 Form A)
Ratings
Resistive load:
Rated Load
UL, CUR
Max. switched power: 13850 VA
Max. switched current: 50 A
Max. switched voltage: 440 VAC
1 Form A (SPST)
50 A at 277 VAC, resistive, 70°C, 100k cycles
20 A at 347 VAC, resistive, 70°C, 30k cycles
5000 W at 240 VAC, tungsten, 40°C, 30k cycles
120 LRA / 20 FLA, at 120 VAC, 40°C, 30k cycles
102 LRA / 17 FLA, at 240 VAC, 40°C, 30k cycles
84 LRA / 14 FLA, at 277 VAC, 40°C, 30k cycles
1 Form C (SPDT)
40 A at 277 VAC, general use, 70°C, 30k cycles
Material
Resistance
Silver tin oxide
< 50 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Temperature
.96 W single coil
1.9 W dual coil
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Initial state of contacts may be changed during transportation or shock!
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 50 A 250 VAC Res. (SPST)
Set and Reset
Pulse Duration
50 ms minimum at nominal coil voltage
Set Time (typical)
15 ms at nominal coil voltage
Reset Time (typical) 15 ms at nominal coil voltage
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm (1 Form A), 6 mm (1 Form C)
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
1.5mm DA at 10–55 Hz
Shock
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
32 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax: +49 89 800 97-200
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-08
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet AZ2501P2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AZ2501P1 | 50 AMP LATCHING POWER RELAY | Zettler |
| AZ2501P2 | 50 AMP LATCHING POWER RELAY | Zettler |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |