DataSheet.jp

AZ2501P1 の電気的特性と機能

AZ2501P1のメーカーはZettlerです、この部品の機能は「50 AMP LATCHING POWER RELAY」です。


製品の詳細 ( Datasheet PDF )

部品番号 AZ2501P1
部品説明 50 AMP LATCHING POWER RELAY
メーカ Zettler
ロゴ Zettler ロゴ 




このページの下部にプレビューとAZ2501P1ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

AZ2501P1 Datasheet, AZ2501P1 PDF,ピン配置, 機能
AZ2501P
50 AMP LATCHING
POWER RELAY
FEATURES
50 Amp switching
Heavy loads to 13850 VA
4 kV dielectric strength
8 mm creepage distance
Manual switch available
Epoxy sealed version available
UL, CUR file E44211
CONTACTS
Arrangement SPDT (1 Form C),
SPST (1 Form A)
Ratings
Resistive load:
Rated Load
UL, CUR
Max. switched power: 13850 VA
Max. switched current: 50 A
Max. switched voltage: 440 VAC
1 Form A (SPST)
50 A at 277 VAC, resistive, 70°C, 100k cycles
20 A at 347 VAC, resistive, 70°C, 30k cycles
5000 W at 240 VAC, tungsten, 40°C, 30k cycles
120 LRA / 20 FLA, at 120 VAC, 40°C, 30k cycles
102 LRA / 17 FLA, at 240 VAC, 40°C, 30k cycles
84 LRA / 14 FLA, at 277 VAC, 40°C, 30k cycles
1 Form C (SPDT)
40 A at 277 VAC, general use, 70°C, 30k cycles
Material
Resistance
Silver tin oxide
< 50 milliohms initially
(at rated current, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Temperature
.96 W single coil
1.9 W dual coil
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Initial state of contacts may be changed during transportation or shock!
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 50 A 250 VAC Res. (SPST)
Set and Reset
Pulse Duration
50 ms minimum at nominal coil voltage
Set Time (typical)
15 ms at nominal coil voltage
Reset Time (typical) 15 ms at nominal coil voltage
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm (1 Form A), 6 mm (1 Form C)
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
1.5mm DA at 10–55 Hz
Shock
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
32 grams
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax: +49 89 800 97-200
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-08

1 Page





AZ2501P1 pdf, ピン配列
AZ2501P
WIRING DIAGRAMS
44
3
12
SPST&Single Coil
3
6
12
SPDT&Single Coil
4
3
1 52
SPST&Double Coil
4
3
6
15 2
SPDT&Double Coil
NOTE:
Standard Polarity type:
1. “Single Coil Latching Version”
(1) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 2 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is disconnected.
2. “Double Coil Latching Version”
(1) After energizing 5 (+) and 1 (-), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 5 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.
Reverse Polarity type:
1. “Single Coil Latching Version”
(1) After energizing 1 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 1 (+) and 2 (-), 50ms pulse, terminal 3 and 4 is disconnected.
2. “Double Coil Latching Version”
(1) After energizing 5 (-) and 1 (+), 50ms pulse, terminal 3 and 4 is connected.
(2) After energizing 5 (-) and 2 (+), 50ms pulse, terminal 3 and 4 is disconnected.
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax: +49 89 800 97-200
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-08


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ AZ2501P1 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AZ2501P1

50 AMP LATCHING POWER RELAY

Zettler
Zettler
AZ2501P2

50 AMP LATCHING POWER RELAY

Zettler
Zettler


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap