|
FOD3150 の電気的特性と機能
|
FOD3150のメーカーはFairchild Semiconductorです、この部品の機能は「Gate Drive Optocoupler」です。 |
|
|
製品の詳細 ( Datasheet PDF )
| 部品番号 FOD3150 |
| 部品説明 Gate Drive Optocoupler |
| メーカ Fairchild Semiconductor |
ロゴ |
このページの下部にプレビューとFOD3150ダウンロード（pdfファイル）リンクがあります。 Total 19 pages |
No Preview Available ! |
October 2011
FOD3150
High Noise Immunity, 1.0A Output Current,
Gate Drive Optocoupler
Features
■ High noise immunity characterized by 20kV/µs
minimum common mode rejection
■ Use of P-channel MOSFETs at output stage enables
output voltage swing close to the supply rail
■ Wide supply voltage range from 15V to 30V
■ Fast switching speed
– 500ns max. propagation delay
– 300ns max. pulse width distortion
■ Under Voltage LockOut (UVLO) with hysteresis
■ Extended industrial temperate range, -40°C to 100°C
temperature range
■ Safety and regulatory approvals
– UL1577, 5000 VRMS for 1 min.
– IEC60747-5-2
■ >8.0mm clearance and creepage distance (option ‘T’)
Applications
■ Industrial inverter
■ Uninterruptible power supply
■ Induction heating
■ Isolated IGBT/Power MOSFET gate drive
Description
The FOD3150 is a 1.0A Output Current Gate Drive
Optocoupler, capable of driving most 800V/20A
IGBT/MOSFET. It is ideally suited for fast switching
driving of power IGBT and MOSFETs used in motor
control inverter applications, and high performance
power system.
It utilizes Fairchild’s patented coplanar packaging
technology, Optoplanar®, and optimized IC design to
achieve high noise immunity, characterized by high
common mode rejection.
It consists of a gallium aluminum arsenide (AlGaAs) light
emitting diode optically coupled to an integrated circuit
with a high-speed driver for push-pull MOSFET output
stage.
Related Resources
■ FOD3120, 2.5A Output Current, Gate Drive
Optocoupler Datasheet
■ www.fairchildsemi.com/products/opto/
Functional Block Diagram
Package Outlines
NC 1
8 VCC
ANODE 2
7 VO2
CATHODE 3
6 VO1
NC 4
5 VEE
Note:
A 0.1µF bypass capacitor must be connected between pins 5 and 8.
8
1
8
1
8
1
©2008 Fairchild Semiconductor Corporation
FOD3150 Rev. 1.0.4
www.fairchildsemi.com
1 Page
Safety and Insulation Ratings
As per IEC 60747-5-2. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data.
Compliance with the safety ratings shall be ensured by means of protective circuits.
Symbol
Parameter
Installation Classifications per DIN VDE 0110/1.89 Table 1
For Rated Main Voltage < 150Vrms
For Rated Main Voltage < 300Vrms
For Rated Main Voltage < 450Vrms
For Rated Main Voltage < 600Vrms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
CTI Comparative Tracking Index
VPR Input to Output Test Voltage, Method b,
VIORM x 1.875 = VPR, 100% Production Test with
tm = 1 sec., Partial Discharge < 5pC
Input to Output Test Voltage, Method a,
VIORM x 1.5 = VPR, Type and Sample Test with
tm = 60 sec.,Partial Discharge < 5 pC
VIORM
VIOTM
Max Working Insulation Voltage
Highest Allowable Over Voltage
External Creepage
External Clearance
External Clearance (for Option T-0.4” Lead Spacing)
Insulation Thickness
Safety Limit Values – Maximum Values Allowed in the
Event of a Failure
TCase
IS,INPUT
PS,OUTPUT
RIO
Case Temperature
Input Current
Output Power (Duty Factor ≤ 2.7%)
Insulation Resistance at TS, VIO = 500V
Min.
Typ. Max. Unit
175
1669
I–IV
I–IV
I–III
I–III
55/100/21
2
1335
890
6000
8
7.4
10.16
0.5
Vpeak
Vpeak
mm
mm
mm
mm
150 °C
25 mA
250 mW
109 Ω
©2008 Fairchild Semiconductor Corporation
FOD3150 Rev. 1.0.4
3
www.fairchildsemi.com
3Pages
Switching Characteristics
Apply over all recommended conditions, typical value is measured at VCC = 30V, VEE = Ground, TA = 25°C
unless otherwise specified.
Symbol
Parameter
Conditions
tPHL
tPLH
PWD
PDD
(Skew)
tr
tf
tUVLO ON
tUVLO OFF
| CMH |
| CML |
Propagation Delay Time to Logic
Low Output
Propagation Delay Time to Logic
High Output
Pulse Width Distortion,
| tPHL – tPLH |
Propagation Delay Difference
Between Any Two Parts or
Channels, (tPHL – tPLH)(7)
Output Rise Time (10% – 90%)
Output Fall Time (90% – 10%)
UVLO Turn On Delay
UVLO Turn Off Delay
Common Mode Transient
Immunity at Output High
Common Mode Transient
Immunity at Output Low
IF = 7mA to 16mA,
Rg = 20Ω, Cg =10nF,
f = 10kHz, Duty Cycle = 50%
IF = 10mA , VO > 5V
IF = 10mA , VO < 5V
TA = 25°C, VCC = 30V,
IF = 7 to 16mA, VCM = 2000V(8)
TA = 25°C, VCC = 30V, VF = 0V,
VCM = 2000V(9)
Min.
100
100
-350
20
20
Typ.
275
255
20
60
60
1.6
0.4
50
50
Max. Units
500 ns
500 ns
300 ns
350 ns
ns
ns
µs
µs
kV/µs
kV/µs
Notes:
1. Maximum pulse width = 10µs, maximum duty cycle = 0.2%
2. Derate linearly above 87°C, free air temperature at a rate of 0.77mW/°C
3. No derating required across temperature range.
4. Functional operation under these conditions is not implied. Permanent damage may occur if the device is
subjected to conditions outside these ratings.
5. Device is considered a two terminal device: Pins 2 and 3 are shorted together and Pins 5, 6, 7 and 8 are shorted
together.
6. 5,000 VRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration.
7. The difference between tPHL and tPLH between any two FOD3150 parts under same test conditions.
8. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of
the common mode impulse signal, Vcm, to assure that the output will remain high (i.e. VO > 15.0V).
9. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of
the common pulse signal, Vcm, to assure that the output will remain low (i.e. VO < 1.0V).
©2008 Fairchild Semiconductor Corporation
FOD3150 Rev. 1.0.4
6
www.fairchildsemi.com
6 Page
合計 : 19 ページ |
| PDF ダウンロード [ FOD3150 データシート.PDF ] |
|
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
|
|
| 部品番号 | 部品説明 | メーカ |
| FOD3150 | Gate Drive Optocoupler | Fairchild Semiconductor |