|
TR0603 の電気的特性と機能
|
TR0603のメーカーはYageoです、この部品の機能は「TRIMMABLE CHIP RESISTORS」です。 |
|
|
製品の詳細 ( Datasheet PDF )
| 部品番号 TR0603 |
| 部品説明 TRIMMABLE CHIP RESISTORS |
| メーカ Yageo |
ロゴ |
このページの下部にプレビューとTR0603ダウンロード（pdfファイル）リンクがあります。 Total 8 pages |
No Preview Available ! |
DATA SHEET
TRIMMABLE CHIP RESISTORS
TR series
0/-10%, 0/-20%, 0/-30%
sizes 0402/0603/0805/1206
RoHS compliant
1 Page
Product specification 3
Chip Resistor Surface Mount TR SERIES 0402/0603/0805/1206 (RoHS Compliant)
8
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER (PREFERRED)
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2350
(1)
XXX XXXXX L
(2) (3) (4)
SIZE TYPE
0402 RC32TR
0603 RC22TR
0805 RC12TR
1206 RC02TR
START TOL.
IN (1) (%)
2350
2350
2350
2350
0/-10%
0/-20%
0/-30%
0/-10%
0/-20%
0/-30%
0/-10%
0/-20%
0/-30%
0/-10%
0/-20%
0/-30%
RESISTANCE PAPER/PE TAPE ON REEL (units) (2)
RANGE
10,000
5,000/10,000
5,000
1 to 10 MΩ 503 22xxx
-
1 to 10 MΩ 503 21xxx
1 to 10 MΩ 503 20xxx
-
-
1 to 10 MΩ -
502 12xxx
1 to 10 MΩ -
502 11xxx
1 to 10 MΩ -
1 to 10 MΩ -
502 10xxx
501 12xxx
1 to 10 MΩ -
501 11xxx
1 to 10 MΩ -
501 10xxx
1 to 10 MΩ -
1 to 10 MΩ -
500 12xxx
500 11xxx
1 to 10 MΩ -
500 10xxx
(1) The resistors have a 12-digit ordering code starting with 2350.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
Last digit of 12NC
Resistance decade (3)
0.01 to 0.0976 X
0.1 to 0.976 X
1 to 9.76 X
10 to 97.6 X
100 to 976 X
1 to 9.76 KX
10 to 97.6 KX
100 to 976 KX
1 to 9.76 MX
10 to 97.6 MX
Example:
0.02 X
0.3 X
1X
33 KX
10 MX
=
=
=
=
=
Last digit
0
7
8
9
1
2
3
4
5
6
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
(4) "L" is optional symbol (Note).
ORDERING EXAMPLE
The ordering code of a RC22TR resistor with terminations, value 330 X
with 0/-30% tolerance, supplied in tape of 5,000 units per reel is:
235050210331(L) or TR0603NR-07330R(L).
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART
NUMBER / 12NC can be added (both are on customer request)
Jan 14, 2009 V.1
www.yageo.com
3Pages
Product specification 6
Chip Resistor Surface Mount TR SERIES 0402/0603/0805/1206 (RoHS Compliant)
8
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
Life/
Operational Life/
Endurance
MIL-STD-202G-method 108A
IEC 60115-1 4.25.1
JIS C 5202-7.10
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required
REQUIREMENTS
±(2%+0.05 Ω)
High
Temperature
Exposure/
Endurance at
upper category
temperature
MIL-STD-202G-method 108A
IEC 60115-1 4.25.3
JIS C 5202-7.11
1,000 hours at maximum operating temperature
depending on specification, unpowered
No direct impingement of forced air to the parts
Tolerances: 155±3 °C
±(1%+0.05 Ω)
Moisture
Resistance
MIL-STD-202G-method 106F
IEC 60115-1 4.24.2
Each temperature / humidity cycle is defined at 8
hours (method 106F), 3 cycles / 24 hours for 10d
with 25 °C / 65 °C 95% R.H, without steps 7a &
7b, unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after
test conclusion
±(2%+0.05 Ω)
Thermal Shock
MIL-STD-202G-method 107G
AR0402/0603: -55/+155 °C
AR0805/1206: -55/+125 °C
Note: Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
±(0.5%+0.05 Ω) for 10 KΩ to
10 MΩ
±(1%+0.05 Ω) for others
Short time
overload
MIL-R-55342D-para 4.7.5
IEC60115-1 4.13
2.5 times RCWV or maximum overload voltage
whichever is less for 5 sec at room temperature
±(2%+0.05 Ω)
No visible damage
Board Flex/
Bending
IEC60115-1 4.33
Device mounted on PCB test board as described,
only 1 board bending required
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
±(1%+0.05 Ω)
No visible damage
Jan 14, 2009 V.1
www.yageo.com
6 Page
合計 : 8 ページ |
| PDF ダウンロード [ TR0603 データシート.PDF ] |
|
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
|
|
| 部品番号 | 部品説明 | メーカ |
| TR0603 | TRIMMABLE CHIP RESISTORS | Yageo |