DataSheet.jp

B1443 の電気的特性と機能

B1443のメーカーはROHM Semiconductorです、この部品の機能は「PNP Transistor - 2SB1443」です。


製品の詳細 ( Datasheet PDF )

部品番号
B1443
部品説明
PNP Transistor - 2SB1443
メーカ
ROHM Semiconductor
ロゴ

ROHM Semiconductor ロゴ 




このページの下部にプレビューとB1443ダウンロード(pdfファイル)リンクがあります。


Total 3 pages
scroll

No Preview Available !

B1443 Datasheet, B1443 PDF,ピン配置, 機能
Power Transistor (50V, 2A)
2SB1443
Features
1) Low saturation voltage.
VCE (sat) = 0.35V (Max.) at IC / IB = 1A / 50mA.
2) Excellent DC current gain characteristics.
Dimensions (Unit : mm)
ATV
Absolute maximum ratings (Ta=25C)
Parameter
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Collector power dissipation
Junction temperature
Storage temperature
Symbol
VCBO
VCEO
VEBO
IC
PC
Tj
Tstg
Limits
50
50
6
2
5
1
150
55 to +150
1 Single pulse, Pw=10ms
2 Printed circuit board 1.7mm thick, collector plating 1cm2 or larger.
Unit
V
V
V
A (DC)
A (Pulse) 1
W 2
°C
°C
(1) (2) (3)
(1) Emitter
(2) Collector
(3) Base
Packaging specifications and hFE
Type
Package
hFE
Marking
Code
Basic ordering unit (pieces)
Denotes hFE
2SB1443
ATV
Q
TV2
2500
Electrical characteristics (Ta=25C)
Parameter
Collector-base breakdown voltage
Collector-emitter breakdown voltage
Emitter-base breakdown voltage
Collector cutoff current
Emitter cutoff current
Collector-emitter saturation voltage
DC current transfer ratio
Transition frequency
Output capacitance
Measured using pulse current
Symbol
BVCBO
BVCEO
BVEBO
ICBO
IEBO
VCE(sat)
hFE
fT
Cob
Min.
Typ.
Max.
Unit
Conditions
50 − − V IC=−50μA
50 − − V IC=−1mA
6 − − V IE=−50μA
0.1
μA VCB=−50V
0.1
μA VEB=−5V
− −0.15 0.35 V IC/IB=−1A/50mA
120 270 VCE/IC=−2V/0.5A
200 MHz VCE=−2V, IE=0.5A, f=100MHz
36 pF VCB=−10V, IE=0A, f=1MHz
www.rohm.com
c 2011 ROHM Co., Ltd. All rights reserved.
1/2
2011.06 - Rev.B
Free Datasheet http://www.Datasheet4U.com

1 Page





B1443 pdf, ピン配列
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Free Datasheet http://www.Datasheet4U.com


3Pages



合計 : 3 ページ
PDF ダウンロード

[ B1443 データシート.PDF ]

データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。

scroll


部品番号部品説明メーカ
B1443

PNP Transistor - 2SB1443

ROHM Semiconductor
ROHM Semiconductor
B1449

PNP Transistor - 2SB1449

Sanyo
Sanyo

www.DataSheet.jp     

|     2020   |  メール    |

    最新        |     Sitemap