|
UGF10DCT の電気的特性と機能
|
UGF10DCTのメーカーはGeneral Semiconductorです、この部品の機能は「ULTRAFAST SOFT RECOVERY RECTIFIER」です。 |
|
|
製品の詳細 ( Datasheet PDF )
| 部品番号 UGF10DCT |
| 部品説明 ULTRAFAST SOFT RECOVERY RECTIFIER |
| メーカ General Semiconductor |
ロゴ |
このページの下部にプレビューとUGF10DCTダウンロード（pdfファイル）リンクがあります。 Total 2 pages |
No Preview Available ! |
NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
UGF10ACT THRU UGF10DCT
ULTRAFAST SOFT RECOVERY RECTIFIER
Reverse Voltage - 50 to 200 Volts Forward Current - 10.0 Amperes
0.405 (10.27)
0.383 (9.72)
ITO-220AB
0.140 (3.56)
DIA.
0.130 (3.30)
0.600 (15.5)
0.580 (14.5)
0.560 (14.22)
0.530 (13.46)
PIN
123
0.670 (17.2)
0.646 (16.4)
0.191 (4.85)
0.171 (4.35)
0.060 (1.52)
0.350 (8.89)
0.330 (8.38)
0.205 (5.20)
0.195 (4.95)
0.037 (0.94)
0.027 (0.69)
0.105 (2.67)
0.095 (2.41)
PIN 1
PIN 3
Dimensions in inches and (millimeters)
FEATURES
0.188 (4.77)
0.172 (4.36)
0.110 (2.80)
0.100 (2.54)
♦ Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
♦ Ideally suited for free wheeling diode power factor
0.131 (3.39)
correction applications
0.122 (3.08) DIA ♦ Soft recovery characteristics
♦ Excellent high temperature switching
♦ Optimized to reduce switching losses
♦ High temperature soldering guaranteed:
250°C/10 seconds at terminals
♦ Glass passivated chip junction
0.110 (2.80)
0.100 (2.54)
0.022 (0.55)
0.014 (0.36)
PIN 2
MECHANICAL DATA
Case: JEDEC ITO-220AB molded plastic body
Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs. max.
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
SYMBOLS UGF10ACT UGF10BCT UGF10CCT UGF10DCT UNITS
VRRM
50
100 150 200 Volts
Working peak reverse voltage
VRWM
50
100 150 200 Volts
Maximum RMS voltage
VRMS
35
70 105 140 Volts
Maximum DC blocking voltage
wwMwa.DxaimtauSmheaevt4eUra.cgoemforward rectified current at TC=100°C
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
VDC 100 100 200 200 Volts
I(AV) 10 Amps
IFSM
60 Amps
Maximum instantaneous forward voltage per leg at IF=10A,
IF=5A,
IF=5A,
Maximum reverse leakage current per leg
at working peak reverse voltage
TJ=25°C
TJ=25°C
TJ=150°C
TJ=25°C
TJ=100°C
VF
IR
1.25
1.10
0.895
10
200
Volts
µA
Maximum reverse recovery time per leg at
IF=1.0A, di/dt=100A/µs, VR=30V, Irr=0.1 IRM
trr 25 ns
Maximum reverse recovery time per leg at
IF=0.5A, IR=1.0A, Irr=0.25A
Maximum reverse recovery current per leg at
IF=5A, di/dt=50A/µs,VR=30V
Maximum stored charge per leg
IF=2A, di/dt=20A/µs, VR=30V Irr=0.1 IRM
Typical thermal resistance from junction to case per leg
Operating junction and storage temperature range
Maximum
Typical
Maximum
Typical
trr
IRM
Qrr
RΘJC
TJ, TSTG
25
15
0.7
5.5
4.5
6.0
-40 to +150
ns
Amps
nC
°C/W
°C
NOTICE: Advanced product information is subject to change without notice
4/98
1 Page
合計 : 2 ページ |
| PDF ダウンロード [ UGF10DCT データシート.PDF ] |
|
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
|
|
| 部品番号 | 部品説明 | メーカ |
| UGF10DCT | ULTRAFAST SOFT RECOVERY RECTIFIER | General Semiconductor |
| UGF10DCT | Dual Ultrafast Soft Recovery Rectifiers |  Vishay Siliconix |